Grizzly Industrial H0775 - Manual
Grizzly Industrial H0775 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PARTS INVENTORY
- Page 3 – INSTALLATION INSTRUCTIONS; Installing the Taper Attachment
- Page 6 – Angle Adjustments; OPERATION & ADJUSTMENTS; Bottom Gib Adjustments; Deadman Operation
- Page 7 – H0775 Parts Breakdown and List
Taper Attachment for G4016
Gear Head Lathe
MODEL H0775
INSTRUCTION SHEET
COPYRIGHT © AUGUST, 2004 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#EM6565 PRINTED IN CHINA
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PARTS INVENTORY The Model H0775 Taper Attachment was carefully packed when it left our warehouse. If you discover that the taper attachment is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materi...
INSTALLATION INSTRUCTIONS The H0775 Taper Attachment mounts quickly to the back bed way of the G4016 Gear Head Lathe. Accurate tapers of up to 12" can be produced without repositioning the attachment. The H0775 features scales at both ends, reading inches-per-foot and degrees. An angle adjusting...
Angle Adjustments The taper angle is adjusted by loosening the two cap screws at the ends of the dovetail slide on the taper attachment. The angle adjusting knob allows for fine control of the angle ( Figure 9 ). There are two scales, one at each end of the main body. One is labeled for degrees and ...
