Page 3 - Table of Contents
Table of Contents INTRODuCTION ............................................... 2 Manual Accuracy ........................................... 2Contact info.................................................... 2identification ................................................... 3 SECTION 1: SAfETy ........
Page 4 - INTRODuCTION; Manual Accuracy; Contact Info
-2- Model g0739 (Mfg. since 2/12) INTRODuCTION We are proud to offer this manual with your new machine! We've made every effort to be exact with the instructions, specifications, drawings, and photographs of the machine we used when writing this manual. However, sometimes we still make an occasional...
Page 5 - Identification
Model g0739 (Mfg. since 2/12) -3- figure 1. Machine identification. Identification spindle hex nut spindle drum and sanding sleeve on/oFF paddle switch w/disabling Key table insert table spindle Washers (not shown) table inserts sander Body power Cord dust port drums and sanding sleeves spindle Wash...
Page 6 - MODEL G0739 OSCILLATING SPINDLE SANDER
-4- Model g0739 (Mfg. since 2/12) The information contained herein is deemed accurate as of 2/24/2012 and represents our most recent product specifications. Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2 Model G0739 MACHIN...
Page 7 - NOTICE; Safety Instructions for Machinery
Model g0739 (Mfg. since 2/12) -5- For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance...
Page 9 - Additional Safety for Spindle Sanders
Model g0739 (Mfg. since 2/12) -7- Additional Safety for Spindle Sanders fEED RATE. never jam a workpiece against the sanding surface. this can cause the workpiece to kick back or damage the machine. Firmly hold the workpiece and ease it against the spindle using light pressure. AvOIDING ENTANGLEMENT...
Page 10 - SECTION 2: POWER SuPPLy; Availability
-8- Model g0739 (Mfg. since 2/12) SECTION 2: POWER SuPPLy Availability Before installing the machine, consider the avail-ability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed. To minimize th...
Page 11 - Extension Cords; Polarized Plug
Model g0739 (Mfg. since 2/12) -9- Extension Cords We do not recommend using an extension cord with this machine. If you must use an extension cord, only use it if absolutely necessary and only on a temporary basis. Extension cords cause voltage drop, which may damage electrical components and shorte...
Page 12 - Needed for Setup
-10- Model g0739 (Mfg. since 2/12) SECTION 3: SETuP the following are needed to complete the setup process, but are not included with your machine. Description Qty • safety glasses ........................................... 1 • Cleaner/degreaser.........................As needed • disposable shop r...
Page 13 - Inventory; Cleanup
Model g0739 (Mfg. since 2/12) -11- Inventory The following is a description of the main compo-nents shipped with your machine. Lay the compo-nents out to inventory them. If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, rep...
Page 14 - Site Considerations
-12- Model g0739 (Mfg. since 2/12) Site Considerations Weight Load Refer to the Machine Data Sheet for the weight of your machine. Make sure that the surface upon which the machine is placed will bear the weight of the machine, additional equipment that may be installed on the machine, and the heavi...
Page 15 - Assembly; Mounting
Model g0739 (Mfg. since 2/12) -13- Assembly The base of this machine has mounting holes that allow it to be fastened to a workbench or other mounting surface to prevent it from moving during operation and causing accidental injury or damage. The strongest mounting option is a "Through Mount"...
Page 16 - Connecting Power; Disconnecting Power
-14- Model g0739 (Mfg. since 2/12) Dust Collection DO NOT operate the Model G0739 without an adequate dust collection system. This sand- er creates substantial amounts of wood dust while operating. failure to use a dust collec- tion system can result in short and long-term respiratory illness. Recom...
Page 17 - Test Run
Model g0739 (Mfg. since 2/12) -15- 7. try to start the machine with the paddle switch. —if the machine does not start, the switch disabling feature is working as designed. —if the machine does start, immediately disconnect power. the switch disabling feature is not working correctly. this safety fea...
Page 18 - SECTION 4: OPERATIONS; Disabling Switch
-16- Model g0739 (Mfg. since 2/12) SECTION 4: OPERATIONS Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine. To reduce the risk of serious injury when using this machine, read an...
Page 20 - SECTION 5: ACCESSORIES
-18- Model g0739 (Mfg. since 2/12) SECTION 5: ACCESSORIES ACCEssoriEs Some aftermarket accessories can be installed on this machine that could cause it to function improperly, increasing the risk of serious personal injury. To minimize this risk, only install accessories recommended for this machine...
Page 21 - SECTION 6: MAINTENANCE; Schedule; before Each use
Model g0739 (Mfg. since 2/12) -19- SECTION 6: MAINTENANCE Always disconnect power to the machine before performing maintenance. failure to do this may result in serious person- al injury. For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructio...
Page 24 - Wiring Safety Instructions
-22- Model g0739 (Mfg. since 2/12) SHOCK HAZARD. Working on wiring that is con- nected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death. Disconnect the power from the machine before ...
Page 25 - Wiring Diagram
Model g0739 (Mfg. since 2/12) -23- READ ELECTRICAL SAFETY ON PAGE 24! Wiring Diagram Single-Phase Silicon Bridge Rectifier KBPC1504 Motor 120V PADDLE SWITCH (Viewed from Behind) G0739 Wiring Diagram 120 VAC 1-15 Plug +
Page 26 - Main breakdown
-24- Model g0739 (Mfg. since 2/12) 91 90 85 84 83 82 74 73 75 76 77 12 11 10 9 8 6 5 (5-1, 5-2, 5-3, 5-4, 5-5, 5-6) 4 (4-1, 4-2, 4-3, 4-4, 4-5) 3 (3-1, 3-2, 3-3, 3-4, 3-5, 3-6) 2 (2-1, 2-2, 2-3) 1 7 13 14 16 15 17 18 66 19 20 21 22 23 24 25 72 56 55 54 53 52 51 49 47 50 48 46 45 42 43 44 41 57 59 60...
Page 27 - Main Parts List
REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P0739001 SPINDLE HEX NUT M10-1.5 36 P0739036 CORD CLAMP 2 P0739002 SPINDLE WASHER SET OF 4 37 PTLW11M INT TOOTH WASHER 4MM 2-1 P0739002-1 SPINDLE WASHER 5/8" OD 38 PHTEK31M TAP SCREW M4 X 14 2-2 P0739002-2 SPINDLE WASHER 7/8" OD 39 PW05M FLAT W...
Page 28 - Labels breakdown
Labels breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION 92 P0739092 WARNING LABEL 94 P0739094 MACHINE HAZARDS LABEL 93 P0739093 ID LABEL 99 PLABEL-14A ELECTRICITY LABEL Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable...
Page 29 - WARRANTY CARD
C U T A LO N G D O T T E D LI N E Name _____________________________________________________________________________ Street _____________________________________________________________________________City _______________________ State _________________________ Zip _____________________Phone # _____...
Page 32 - Buy Direct and Save with Grizzly; ORDER
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! ~Since 1983~ ORDER 24 HOURS A DAY! 1-800-523-4777 Visit Our Website Today For Current Specials!
