Grizzly Industrial G1061 - Manual
Grizzly Industrial G1061 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING; • Arsenic and chromium from chemically treated
- Page 3 – Table Of Contents
- Page 5 – Safety Instructions For Power Tools
- Page 6 – Additional Safety Instructions For Buffers
- Page 7 – SECTION 2: CIRCUIT REQUIREMENTS; Extension Cords
- Page 8 – SECTION 3: INTRODUCTION; Commentary
- Page 9 – Mounting
- Page 10 – SECTION 6: OPERATIONS; NOTICE
- Page 11 – Drum Sanding
- Page 12 – Accessory Removal
- Page 13 – SECTION 7: MAINTENANCE; Miscellaneous
- Page 18 – WARRANTY AND RETURNS
- Page 19 – WARRANTY CARD
BUFFING SYSTEM
MODEL G1061/G1061Z
INSTRUCTION MANUAL
COPYRIGHT © 1992 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
JANUARY, 2002 PRINTED IN TAIWAN.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
WARNING Some dust created by power sanding, sawing, grind-ing, drilling, and other construction activities containschemicals known to the State of California to causecancer, birth defects or other reproductive harm. Someexamples of these chemicals are: • Lead from lead-based paints.• Crystalline sil...
Table Of Contents PAGE 1. SAFETY SAFETY RULES FOR POWER TOOLS ..............................................................2-3ADDITIONAL SAFETY INSTRUCTIONS FOR BUFFERS ......................................4 2. CIRCUIT REQUIREMENTS 110V OPERATION ......................................................
G1061/G1061Z Buffing System -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi-tion. Conductor size should be in accor-dance with the chart below. The amperagerating should be listed on the motor or toolnameplate. An undersized cord will causea drop in line voltage res...
