Grizzly Industrial G1061 - Manuals

Page 2 - WARNING; • Arsenic and chromium from chemically treated

WARNING Some dust created by power sanding, sawing, grind-ing, drilling, and other construction activities containschemicals known to the State of California to causecancer, birth defects or other reproductive harm. Someexamples of these chemicals are: • Lead from lead-based paints.• Crystalline sil...

Page 3 - Table Of Contents

Table Of Contents PAGE 1. SAFETY SAFETY RULES FOR POWER TOOLS ..............................................................2-3ADDITIONAL SAFETY INSTRUCTIONS FOR BUFFERS ......................................4 2. CIRCUIT REQUIREMENTS 110V OPERATION ......................................................

Page 5 - Safety Instructions For Power Tools

G1061/G1061Z Buffing System -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi-tion. Conductor size should be in accor-dance with the chart below. The amperagerating should be listed on the motor or toolnameplate. An undersized cord will causea drop in line voltage res...

Page 6 - Additional Safety Instructions For Buffers

-4- G1061/G1061Z Buffing System Additional Safety Instructions For Buffers 1. ALWAYS WEAR EYE PROTECTION! 2. WEAR AN APPROVED DUST MASKOR RESPIRATOR. Buffing operations produce dust. 3. MAKE SURE BUFFER IS SECUREDFIRMLY TO A BENCH OR STANDBEFORE USE. Any “wobbles” must be corrected by shimming or bl...

Page 7 - SECTION 2: CIRCUIT REQUIREMENTS; Extension Cords

G1061/G1061Z Buffing System -5- 110V Operation SECTION 2: CIRCUIT REQUIREMENTS If you find it necessary to use an extension cordwith the Model G1061/G1061Z, make sure thecord is rated Hard Service (grade S) or better.Refer to the chart in the standard safety instruc-tions to determine the minimum ga...

Page 8 - SECTION 3: INTRODUCTION; Commentary

-6- G1061/G1061Z Buffing System SECTION 3: INTRODUCTION We are proud to offer the Grizzly ModelG1061/G1061Z Buffing System. The ModelG1061/G1061Z is part of a growing Grizzly familyof fine woodworking machinery. When usedaccording to the guidelines set forth in this manu-al, you can expect years of ...

Page 9 - Mounting

G1061/G1061Z Buffing System -7- Unpacking Piece Inventory NOTICE A full parts list and breakdown can be foundtoward the end of this manual. For easierassembly, or to identify specific parts,please refer to the detailed illustrations atthe end of the manual. After all the parts have been removed from...

Page 10 - SECTION 6: OPERATIONS; NOTICE

-8- G1061/G1061Z Buffing System SECTION 6: OPERATIONS Keep loose clothingrolled up and out of theway of machinery andkeep hair pulled back. Wear safety glasses dur-ing the entire operationprocess. Failure to com-ply may result in seriouspersonal injury. Using this machine pro-duces sawdust which may...

Page 11 - Drum Sanding

G1061/G1061Z Buffing System -9- Buffing & Polishing For buffing and polishing, Grizzly offers a broadline of buffing wheels and polishing compounds.Please refer to our current catalog. To buff or pol-ish: 1. Make sure the power cord is unplugged andremove the 1 3 ⁄ 8 " hex nuts at the end of...

Page 12 - Accessory Removal

-10- G1061/G1061Z Buffing System Accessory Removal To remove the buffing or sanding attachments,ensure that the switch is pushed in and the powercord is disconnected. With buffing wheels mount-ed, hold the shaft with one hand while looseningthe nut with a wrench. If both shafts are con-cealed by san...

Page 13 - SECTION 7: MAINTENANCE; Miscellaneous

G1061/G1061Z Buffing System -11- SECTION 7: MAINTENANCE Always be aware of the condition of your buffer.Routinely check the condition of the followingitems and repair or replace as necessary: • Loose mounting bolts • Worn switch • Worn or damaged cord • Worn or damaged support bearings or guidebeari...

Page 18 - WARRANTY AND RETURNS

-16- G1061/G1061Z Buffing System Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,negligence, accidents, repairs or alterations or l...

Page 19 - WARRANTY CARD

Name ____________________________________________________________________________________ Street ____________________________________________________________________________________ City ______________________________________________________________State________Zip_________ Phone Number_____________...