Page 2 - Firmware 1.0.1.22 Page; Safety Instructions; Warnings
GXV3662 IP Camera Firmware 1.0.1.22 Page 2 of 36 Grandstream Networks, Inc. 03/2011 Safety Instructions These instructions are intended to assist users with the operation of the GXV3662 and also to instruct on how to avoid dangerous situations or damage to the device. Warnings : Serious injury or de...
Page 3 - Note; undesired operation.
GXV3662 IP Camera Firmware 1.0.1.22 Page 3 of 36 Grandstream Networks, Inc. 03/2011 Note ： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference re...
Page 4 - Contents
GXV3662 IP Camera Firmware 1.0.1.22 Page 4 of 36 Grandstream Networks, Inc. 03/2011 Contents Welcome ......................................................................................................................................................... 5 Package Contents .............................
Page 5 - Welcome; your LAN or internet.
GXV3662 IP Camera Firmware 1.0.1.22 Page 5 of 36 Grandstream Networks, Inc. 03/2011 Welcome The GXV3662 is a next generation IP camera for remote monitoring and surveillance over your LAN or internet. The GXV3662 combines best in class IP video technology and SIP protocols for a robust IP surveillan...
Page 6 - Items in the package:
GXV3662 IP Camera Firmware 1.0.1.22 Page 6 of 36 Grandstream Networks, Inc. 03/2011 Package Contents Items in the package: GXV3662 IP Camera 12V DC power Adapter attached to terminal block 8-pin terminal block connector – 8-pin connector block for connecting external devices, such as infrared ...
Page 7 - Product Overview
GXV3662 IP Camera Firmware 1.0.1.22 Page 7 of 36 Grandstream Networks, Inc. 03/2011 Product Overview GXV3662 Top View GXV3662 Side View GXV3662 Bottom View
Page 9 - Network; Type; Lens
GXV3662 IP Camera Firmware 1.0.1.22 Page 9 of 36 Grandstream Networks, Inc. 03/2011 4 Alarm/Audio NOTE : GXV3662 does not support zoom Type Port Description AUDIO GND Audio Output OUT IN+ Audio Input IN- ALARM IN+ Alarm Input IN- O+ Alarm Output O- 5 Network 10/100 Switch LAN port for connecting to ...
Page 10 - GXV3662 Sample Connection Diagram
GXV3662 IP Camera Firmware 1.0.1.22 Page 10 of 36 Grandstream Networks, Inc. 03/2011 GXV3662 Sample Connection Diagram GXV3662 Key Features The table below lists the key features the GXV3662 Supports. Features GXV3662 Image Sensor 1/3‖, 1.2 Megapixel CMOS, 1280H x 960V, day and night mode, exception...
Page 12 - Minimum Recommended System Requirement; Windows 2000 Server Professional, Windows XP, Windows Vista.; Using the Power adapter as power supply; Connect an RJ-45 cable to the NETWORK port of the GXV3662.; Using PoE as power supply:; Connect an RJ-45 to the NETWORK port of the GXV3662.
GXV3662 IP Camera Firmware 1.0.1.22 Page 12 of 36 Grandstream Networks, Inc. 03/2011 Minimum Recommended System Requirement Windows 2000 Server Professional, Windows XP, Windows Vista. CPU: Intel Pentium 4 or higher, 2 GHz. RAM: 1 GB (4 GB recommended for larger systems). Support for DirectX...
Page 13 - Configuring the GXV3662 via Web Browser; ccess; admin
GXV3662 IP Camera Firmware 1.0.1.22 Page 13 of 36 Grandstream Networks, Inc. 03/2011 Configuring the GXV3662 via Web Browser The GXV3662 ‘s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer. A c...
Page 15 - Items on GXV3662 Home Page; flash
GXV3662 IP Camera Firmware 1.0.1.22 Page 15 of 36 Grandstream Networks, Inc. 03/2011 GXV3662 Home Web Page Figure 2: Home web page of GXV3662-HD Items on GXV3662 Home Page 1 Motion Detection If the motion detection alarm is triggered, the indicator will flash red . Click on the indicator to turn off...
Page 16 - GXV3662 System Time and Name Page; Current System Time; Set the System Time; Update via NTP Server; OSD Date Format
GXV3662 IP Camera Firmware 1.0.1.22 Page 16 of 36 Grandstream Networks, Inc. 03/2011 13 Play Displays the video in the main frame 14 Capture Captures the image displayed and saves it to C:\GS_Capture (default directory). 15 Record Records the video and saves it to C:\GS_Record (default directory). 1...
Page 18 - Video Settings; Increasing the frame rate will; Audio Settings
GXV3662 IP Camera Firmware 1.0.1.22 Page 18 of 36 Grandstream Networks, Inc. 03/2011 Video Settings Preferred Video Codec – The GXV3662 supports the H.264 video codec. Resolution – The higher the resolution is, the better the video quality is, and higher bandwidth is required. Low ------------------...
Page 19 - Power Frequency; – Assigning an IP to the GXV3662
GXV3662 IP Camera Firmware 1.0.1.22 Page 19 of 36 Grandstream Networks, Inc. 03/2011 Microphone Volume : The user can adjust the volume gain of the microphone on a range from 1 to 5 Speaker Volume : The user can adjust the speaker volume on a range from 0 to 31 Power Frequency - this setting should ...
Page 20 - DNS Configuration; DDNS Page; Set up DDNS; Basic Settings
GXV3662 IP Camera Firmware 1.0.1.22 Page 20 of 36 Grandstream Networks, Inc. 03/2011 are set to zero by default. Static IP addresses are recommended for the GXV3662 DNS Configuration There are two methods of DNS configuration on the GXV3662: 1. The GXV3662 can obtain the DNS server automatically 2. ...
Page 21 - Register the GXV3662 to a SIP Server
GXV3662 IP Camera Firmware 1.0.1.22 Page 21 of 36 Grandstream Networks, Inc. 03/2011 ISP Type. Site Name – The DDNS name for your device. DDNS Account/ DDNS Password – The account and password from the DDNS Provider. STUN Server – If the device is behind a router, a STUN server is needed to help pen...
Page 22 - Phone List; Available phone numbers
GXV3662 IP Camera Firmware 1.0.1.22 Page 22 of 36 Grandstream Networks, Inc. 03/2011 Authenticate ID – The SIP service subscriber‘s Authenticate ID used for authentication. It can be identical to or different from the SIP User ID. Authenticate Password – The SIP service subscriber‘s account password...
Page 23 - System Statistics
GXV3662 IP Camera Firmware 1.0.1.22 Page 23 of 36 Grandstream Networks, Inc. 03/2011 GXV3662 Status Page System Statistics System Statistics lists hardware and software information, for example, the part number, the software version, about the GXV3662. Hardware Version – This field contains the prod...
Page 24 - GXV3662 User Management Page; Server Maintenance
GXV3662 IP Camera Firmware 1.0.1.22 Page 24 of 36 Grandstream Networks, Inc. 03/2011 This section shows the Lens information of GXV3662. The Lens type information contains the brand name, the size of image sensor, the resolution and so on. GXV3662 User Management Page All current users will be liste...
Page 25 - Performing a firmware upgrade:
GXV3662 IP Camera Firmware 1.0.1.22 Page 25 of 36 Grandstream Networks, Inc. 03/2011 address or domain name of the firmware server (the location of the firmware files). Automatic Upgrade Interval – Enter the frequency (in minutes) in which the HTTP/HTTPS/TFTP server will be checked for new firmware ...
Page 26 - FTP Settings
GXV3662 IP Camera Firmware 1.0.1.22 Page 26 of 36 Grandstream Networks, Inc. 03/2011 User Name/ Password – The user name and password required to log in to your SMTP server, for example, [email protected]/123. SSL – Checked if the SMTP server requires a secure connection. Test Email Account Settings – C...
Page 27 - Connect Alarm Input Equipment to the GXV3662; following the diagram below.
GXV3662 IP Camera Firmware 1.0.1.22 Page 27 of 36 Grandstream Networks, Inc. 03/2011 (PIR), smoke sensor or light sensor to it. The detectable signal voltage range for alarm-in is from 1.8V to 15 V NOTE: Please do not connect a device that has a signal voltage that is higher than 15V, this will dama...
Page 28 - Set up Alarm Event Time Schedule; Available time schedules
GXV3662 IP Camera Firmware 1.0.1.22 Page 28 of 36 Grandstream Networks, Inc. 03/2011 defined time period – the time schedule. The GXV3662 allows multiple alarm actions. Record Video – If this option is selected, the GXV3601 will record the video when an alarm is triggered. You can enter the length o...
Page 29 - How to connect an Alarm Output Equipment to GXV3662; by following the diagram below.
GXV3662 IP Camera Firmware 1.0.1.22 Page 29 of 36 Grandstream Networks, Inc. 03/2011 How to connect an Alarm Output Equipment to GXV3662 Here is a sample connection diagram. Connect the alarm output equipment to the GXV3662 by following the diagram below. GXV3662 Motion Detection Page The GXV3601 su...
Page 30 - Configure Motion Detection & Alarm Actions; Button to save sensitivity only
GXV3662 IP Camera Firmware 1.0.1.22 Page 30 of 36 Grandstream Networks, Inc. 03/2011 Show Motion Detection Regions – If this option is selected, the motion detection regions will be displayed on the screen with a white border. To Edit a Monitored Area 1. In the Select a Region dropdown list, select ...
Page 31 - Configure Motion Detection Time Schedule; Syslog Server
GXV3662 IP Camera Firmware 1.0.1.22 Page 31 of 36 Grandstream Networks, Inc. 03/2011 Configure Motion Detection Time Schedule This section allows you to configure the time during which the GXV3662 will monitor the motion detection. The GXV3662 not only can monitor your settings but also can take act...
Page 32 - IP VIDEO SURVEILLANCE; FAQ
GXV3662 IP Camera Firmware 1.0.1.22 Page 32 of 36 Grandstream Networks, Inc. 03/2011 GXV3662 Live Storage This page displays detailed information of the live storage devices connected to the GXV3662 such as video and image files. You can view, download or delete the stored files. Storage Information...
