Grandstream Networks 486 - Manual

Page 2 - Table of Contents; WAN

HandyTone-486 User Manual Grandstream Networks, Inc. 2 Table of Contents 1 WELCOME ......................................................................................................... 3 2 INSTALLATION .................................................................................................

Page 3 - Welcome

HandyTone-486 User Manual Grandstream Networks, Inc. 3 1 Welcome Congratulations on becoming an owner of HandyTone-486. You made an excellent choice and we hope you will enjoy all its capabilities. Grandstream's award-wining HandyTone-486 is an all-in-one VoIP integrated access device that features ...

Page 4 - Installation; Top View

HandyTone-486 User Manual Grandstream Networks, Inc. 4 2 Installation HandyTone-486 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The HandyTone-486 VoIP functionalities are available via a regular analog telepho...

Page 5 - What is Included in the Package; Safety Compliances

HandyTone-486 User Manual Grandstream Networks, Inc. 5 3 What is Included in the Package The HandyTone-486 package contains: 1) One HandyTone-486 2) One universal power adaptor 3) One Ethernet cable 3.1 Safety Compliances The HandyTone-486 is compliant with various safety standards including FCC/CE ...

Page 6 - Product; Key Features; adaptive jitter control and packet loss concealment technology

HandyTone-486 User Manual Grandstream Networks, Inc. 6 4 Product Overview 4.1 Key Features • Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc. • Built-in router, NAT, Gateway and DMZ port forwarding • Powerful dig...

Page 7 - Hardware Specification; UL

HandyTone-486 User Manual Grandstream Networks, Inc. 7 4.2 Hardware Specification The table below describes the difference among these models. Model HandyTone-486 LAN interface 1xRJ45 10Base-T WAN interface 1xRJ45 10Base-T FXS telephone port 1xFXS PSTN port 1x life line port Button 1 LED Green and r...

Page 8 - Basic; Get Familiar with Key Pad and Voice Prompt; Direct IP

HandyTone-486 User Manual Grandstream Networks, Inc. 8 5 Basic Operations 5.1 Get Familiar with Key Pad and Voice Prompt HandyTone-486 has stored a voice prompt menu for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button or “***” from the analog phone ....

Page 9 - Make Phone Calls; Calling phone or extension numbers; HandyTone ATA) have public IP addresses, or

HandyTone-486 User Manual Grandstream Networks, Inc. 9 5.2 Make Phone Calls 5.2.1 Calling phone or extension numbers There are currently two methods to make an extension number call: a) Dial the numbers number directly and wait for 4 (default) seconds. b) Dial the numbers directly, and press # (assu...

Page 10 - followed by pressing the “#” key if; Blind Transfer; Attended Transfer; Attend Transfer

HandyTone-486 User Manual Grandstream Networks, Inc. 10 Examples: If the target IP address is 192.168.0.160, the dialing convention is Voice Prompt with option 47, then 192168000160 followed by pressing the “#” key if it is configured as a send key or wait for more than 5 seconds. In this case, the ...

Page 11 - dial tone; Send and Receive PSTN Calls Through PSTN Line Port; Call Features; Call Features Table; Key

HandyTone-486 User Manual Grandstream Networks, Inc. 11 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone 2. A then dial C’s number then # (or wait for 4 seconds), A and C now in conversation. 3. Then A can hang up. Note: When intended Transfer failed, i...

Page 12 - PSTN Pass Through; LED Light Pattern Indication; RED LED

HandyTone-486 User Manual Grandstream Networks, Inc. 12 dial the forward number and hang up. *93 Cancel Delayed Call Forward To cancel this Forward, dial “*93” and get the dial tone, then hang up Flash/Hook When in conversation, this action will switch to the new incoming call if user heard the call...

Page 13 - Configuration; Configuring HandyTone-486 WAN IP through Voice Prompt; DHCP Mode; Configuring HandyTone-486 with Web Browser; Access the Web Configuration Menu; From the LAN port use the default LAN gateway IP address:; End User Configuration

HandyTone-486 User Manual Grandstream Networks, Inc. 13 6 Configuration Guide 6.1 Configuring HandyTone-486 WAN IP through Voice Prompt 6.1.1 DHCP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use DHCP. 6.1.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 ...

Page 14 - Welcome to Grandstream HandyTone-486; Grandstream HandyTone 486 Configuration

HandyTone-486 User Manual Grandstream Networks, Inc. 14 Welcome to Grandstream HandyTone-486 Password Login The password is case sensitive and the factory default password for End User password is ‘123’. After the correct password is entered in the login screen, the embedded Web server inside the Ha...

Page 16 - This field shows WAN port IP address.; Detected NAT Type; Allow the user to set a specific MAC address. Set in Hex format

HandyTone-486 User Manual Grandstream Networks, Inc. 16 MAC Address The device ID, in HEX format. This is very important ID for ISP troubleshooting. WAN IP Address This field shows WAN port IP address. Product Model This field contains the product model info. Software Version Program: This is the ma...

Page 17 - Advanced User Configuration

HandyTone-486 User Manual Grandstream Networks, Inc. 17 LAN DHCP Base IP: Base IP for the LAN port, which function as a Gateway for the subnet. Default value is 192.168.2.1 DHCP IP Lease Time: Value is set in units of hours. Default value is 120hr (5 Days.) The time IP address are assigned to the LA...

Page 24 - Saving the Configuration Changes; Your configuration changes have been saved.; Rebooting the HandyTone-486 from remote; Grandstream HandyTone-486 Rebooting Status; You may relogin by clicking on the link below in 30 seconds.

HandyTone-486 User Manual Grandstream Networks, Inc. 24 6.2.4 Saving the Configuration Changes Once a change is made, the user should press the “Update” button in the Configuration Menu. The HandyTone ATA will then display the following screen to confirm that the changes have been saved. Grandstream...

Page 25 - Configuration through a Central Server

HandyTone-486 User Manual Grandstream Networks, Inc. 25 6.3 Configuration through a Central Server Grandstream HandyTone ATAs can be automatically configured from a central provisioning system. When HandyTone ATA boot up, it will send TFTP or HTTP request to download configuration files, there are t...

Page 26 - Software; Upgrade through HTTP

HandyTone-486 User Manual Grandstream Networks, Inc. 26 7 Software Upgrade 7.1 Upgrade through HTTP To upgrade software, HandyTone ATAs can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server: http://firmware.mycompany.com...

Page 28 - Restore Factory Default Setting; Warning

HandyTone-486 User Manual Grandstream Networks, Inc. 28 8 Restore Factory Default Setting Warning : Restore the Factory Default Setting will delete all configuration information of the device. Step one: Find the MAC Address of the device. The MAC address of the device is located on the bottom of the...

Grandstream Networks 486 - Manual

Table of Contents:

Summary

Other Grandstream Networks Models