Page 2 - HTTP.................................................
2 Table of Contents 1 WELCOME……………………………………………………………. 4 2 INSTALLATION……………………………………………………… 5 2.1 W HAT IS I NCLUDED IN THE P ACKAGE …………………………………5 2.2 C ONNECTING Y OUR P HONE …………………………………………...5 2.3 S AFETY C OMPLIANCES ………………………………………………..6 2.4 W ARRANTY …………………………………………………………...6 3 PRODUCT OVER...
Page 3 - RESTORE FACTORY DEFAULT SETTING........................47
3 6.2 U PGRADE THROUGH TFTP………………………………………….. 45 7 RESTORE FACTORY DEFAULT SETTING……………………47 APPENDIX I GLOSSARY OF TERMS………………………………...48
Page 4 - Welcome
4 1 Welcome Thank you for purchasing Grandstream BudgeTone-200 IP Phone. You made an excellent choice and we hope you will enjoy all its capabilities. Grandstream's BudgeTone-200 SIP IP phone is the innovative IP telephone that offers a rich set of functionality and superb sound quality. They are fu...
Page 5 - Installation; One BudgeTone -200 Main Case; Connecting Your Phone; PC Port
5 2 Installation 2.1 What is Included in the Package The BudgeTone-200 phone package contains: 1. One BudgeTone -200 Main Case 2. One Handset 3. One Phone Cord 4. One Universal Power Adapter 5. One Ethernet Cable 2.2 Connecting Your Phone Following is a backside picture of BudgeTone-200, each connec...
Page 6 - Safety Compliances
6 The table below describes the connectors on the BudgeTone-200 phone: LAN 10/100 Switch LAN port for connecting to Ethernet. PC 10/100 Switch port for connecting PC POWER 5V power port HEADSET 2.5mm Headset port 2.3 Safety Compliances The BudgeTone-200 phone is compliant with various safety standar...
Page 8 - Product Overview; Front View
8 3 Product Overview The following photo illustrates the appearance of a BudgeTone-200 IP phone. Front View Side View
Page 9 - Key Features
9 3.1 Key Features Grandstream BudgeTone-200 IP Phone is a next generation IP telephone based on industry open standard SIP (Session Initiation Protocol). Built on innovative technology, Grandstream IP Phone features market leading superb sound quality and rich functionalities at mass-affordable pri...
Page 11 - Hardware Specification; UL
11 3.2 Hardware Specification The table below describes the hardware specification of BudgeTone-200: Model BudgeTone-200 LAN interface 2xRJ45 10/100Base-T Headset Jack 2.5mm Headset port LED 1 LED in RED color Phone Case 25-button keypad 12-digit caller ID LCD Universal Switching Power Adaptor Input...
Page 12 - Using BudgeTone-200 IP Phone; PM; 下午; AM; 上午; Icon; Network Status Icon:
12 4 Using BudgeTone-200 IP Phone 4.1 Getting Familiar with LCD / LED BudgeTone-200 phone has a numeric LCD of 64mmx24mm size with backlight. This model has a small red LED status reminder. Here is the display when all segments illuminate: PM 下午 010 AM 上午 When the phone is in the normal idle state, ...
Page 14 - Getting Familiar with Keypad
14 4.2 Getting Familiar with Keypad Called Numbers Menu Button LCD Red LED Message Hold Mute/Delete Send/Dial Speakerphone Flash Conference Transfer Up/Down Keys Callers
Page 16 - SPEAKERPHONE; Enter hands-free mode; Making and Answering Phone Calls; Handset, Speakerphone and Headset Mode; Press the SEND button directly to redial the number last called.
16 SEND/(RE)DIAL Dial a new number inputted or Redial the number last dialed. After entering the phone number, pressing this key would force a call to go out immediately before timeout SPEAKERPHONE Enter hands-free mode 4.3 Making and Answering Phone Calls 4.3.1 Handset, Speakerphone and Headset Mod...
Page 17 - Make Calls using IP Address
17 • To dial another extension on the same proxy, such as 1008, simply pick up handset or press speakerphone, dial 1008 and then press the “SEND” button. • To dial a PSTN number such as 6266667890, you might need to enter in some prefix number followed by the phone number. Please check with your VoI...
Page 18 - Answer an Incoming Call; Pick up the handset to answer the call normally using handset, or; Call Hold; he will hear a; Call Transfer
18 To make a direct IP to IP call, first off hook, then press “MENU” key, then enter a 12- digit target IP address to make the call. If port is not default 5060, destination ports can be specified by using “*4” (encoding for “:”) followed by the port number. Examples: • If the target IP address is 1...
Page 19 - Blind Transfer; in order to make the features to work.; Attended Transfer; Conference Call
19 4.3.7.1 Blind Transfer User can transfer an active call to a third party without announcement. User presses the “TRANSFER” button and if the other voice channel is available (i.e., there is no other active conversation besides the current one), user will hear a dial tone. User can then dial the t...
Page 20 - Checking Message and Message Waiting Indication; Call Features
20 Assuming that call party A and B are in conversation. A wants to bring C in a conference: 1. A presses the “CONFERENCE” button to get a dial tone and put B on hold 2. A dials C’s number then “SEND” key to make the call 3. If C answers the call, then A presses “CONFERENCE” button to bring B, C in ...
Page 22 - Configuration Guide; Configuration with Keypad; Menu Item
22 5 Configuration Guide 5.1 Configuration with Keypad When the phone is IDLE or On Hook, press the MENU button to enter key pad menu state. When the phone goes off-hook or a call comes in, the phone automatically exits the key pad menu state and prepare for the call. It also exits the key pad menu ...
Page 24 - ring 0; MENU; CAREFUL
24 Menu Item Menu Functions 10 Display “[ 10] Phy Addr ” Press MENU to display the physical / MAC address Press ‘ ↓ ’ or ’ ↑ ’ to exit 11 Display “[11] ring 0 ” Press MENU to hear the selected ring tone, press ‘ ↓ ’ or ’ ↑ ’ to select the stored ring tones. Now only 3 are available, ring 0 (default)...
Page 25 - Configuration with Web Browser; Access the Web Configuration Menu; where the; IP Address; End User Configuration; Grandstream Device Configuration
25 5.2 Configuration with Web Browser BudgeTone 200 series IP phone has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the IP phone through a Web browser such as Microsoft’s IE. 5.2.1 Access the Web Configuration Men...
Page 28 - There are two modes under which the BudgeTone 200 can operate:
28 Update All Rights Reserved Grandstream Networks, Inc. 2004, 2005 End User Password This contains the password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters. IP Address There are two modes under which the BudgeTone 200 can operate: • If D...
Page 29 - Allow the user to set a specific MAC address. Set in Hex format.; disabled
29 Cloned WAN MAC Addr Allow the user to set a specific MAC address. Set in Hex format. LAN Subnet Mask Sets the LAN subnet mask. Default value is 255.255.255.0 LAN DHCP Base IP Base IP for the LAN port, which function as a Gateway for the subnet. Default value is 192.168.2.1. DHCP IP Lease Time Val...
Page 30 - Advanced User Configuration
30 MAC Address The device ID, in HEX format. This is a very important ID for ISP troubleshooting. IP Address This field shows LAN IP address of BudgeTone 200 Product Model This field contains the product model info. Software Version • Program: This is the main software release, its number is always ...
Page 31 - Silence Suppression:
31 Advanced User configuration includes not only the end user configuration, but also advanced configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration. Following is a screen shot of the advanced configuration page: Grandstream Device Conf...
Page 32 - Authenticate Conf File:; Distinctive Ring Tone:
32 Allow DHCP Option 66 to override server: No Yes Automatic Upgrade: No Yes, check for upgrade every 10080 minutes (default 7 days) Always Check for New Firmware Check New Firmware only when F/W pre/suffix changes Authenticate Conf File: No Yes (cfg file would be authenticated before acceptance if ...
Page 33 - Default is 4 seconds.
33 Admin Password Administrator password. Only administrator can configure the “Advanced Settings” page. Password field is purposely left blank for security reason after clicking update and saved. The maximum password length is 25 characters. Silence Suppression This controls the silence suppression...
Page 34 - IP address or Domain name of the STUN server.; Allow DHCP
34 Local RTP port This parameter defines the local RTP-RTCP port pair the BudgeTone 200 will listen and transmit. It is the base RTP port for channel 0. When configured, channel 0 will use this port _value for RTP and the port_value+1 for its RTCP; channel 1 will use port_value+2 for RTP and port_va...
Page 35 - This parameter sets the payload type for DTMF using RFC2833.; Syslog Server; sent or received SIP message (DEBUG level); NTP server
35 Automatic Upgrade Choose Yes to enable automatic upgrade and provisioning. In “Check for new firmware every” field, enter the number of days to enable BudgeTone 200 to check the server for firmware upgrade or configuration in the defined period of days. When set to No, BudgeTone 200 will only do ...
Page 37 - SIP; User ID is phone number:
37 Following is the screenshot of the Account Configuration Page:- Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS ACCOUNT Account Active: No Yes Account Name: MyCompany (e.g., MyCompany) SIP Server: sip.mycompany.com (e.g., sip.mycompany.com, or IP address) Outbound Proxy: ...
Page 39 - Individual Account Settings; This field indicates whether the account is active or not.
39 Turn off speaker on remote disconnect: No Yes Preferred Vocoder: (in listed order) choice 1: PCMU choice 2: PCMA choice 3: G.729A /B choice 4: G.723.1 choice 5: GSM choice 6: PCMU choice 7: PCMA choice 8: G.729A /B Special Feature: Standard Update All Rights Reserved Grandstream Networks, Inc. 20...
Page 42 - There are 4 different ring tone that are defined:; Auto Answer
42 UAS Specify Refresher As a Callee, select UAC to use caller or proxy server as the refresher, or UAS to use the phone as the refresher. Force INVITE Session Timer can be refreshed using INVITE method or UPDATE method. Select “Yes” to use INVITE method to refresh the session timer. Enable 100rel T...
Page 43 - Your configuration changes have been saved.; Rebooting the Phone from Remote; You may relogin by clicking on the link below in 30 seconds.
43 5.2.4 Saving the Configuration Changes Once a change is made, the user should press the “Update” button in the Configuration Menu. The IP phone will then display the following screen to confirm that the changes have been saved: Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTI...
Page 44 - Configuration through Central Provisioning Server
44 5.3 Configuration through Central Provisioning Server Grandstream BudgeTone 200 can be automatically configured from a central provisioning system. When BudgeTone 200 boots up, it will send TFTP or HTTP request to download configuration files, there are two configuration files, one is “cfg.txt” a...
Page 45 - Firmware Upgrade; Upgrade through HTTP; user needs
45 6 Firmware Upgrade 6.1 Upgrade through HTTP To upgrade software, BudgeTone 200 can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server: http://firmware.mycompany.com:6688/Grandstream/1.0.1.12 Where firmware.mycompany.co...
Page 47 - Restore Factory Default Setting
47 7 Restore Factory Default Setting Warning !!! Restore the Factory Default Setting will DELETE all configuration information of the device. Please backup or print out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameter...
Page 48 - Appendix I Glossary of Terms; Address Resolution Protocol is a protocol used by the; CODEC
48 8 Appendix I Glossary of Terms ADSL Asymmetric Digital Subscriber Line: Modems attached to twisted pair copper wiring that transmit from 1.5 Mbps to 9 Mbps downstream (to the subscriber) and from 16 kbps to 800 kbps upstream, depending on line distance. AGC Automatic Gain Control, is an electroni...
Page 52 - Network Time Protocol; VoIP
52 NAT Network Address Translation NTP Network Time Protocol , a protocol to exchange and synchronize time over networks The port used is UDP 123 Grandstream products using NTP to get time from Internet OBP/SBC Outbound Proxy or another name Session Border Controller. A device used in VoIP networks....
Page 53 - IETF; TCP
53 Real-time Transport Protocol defines a standardized packet format for delivering audio and video over the Internet. It was developed by the Audio-Video Transport Working Group of the IETF and first published in 1996 as RFC 1889 SDP Session Description Protocol, is a format for describing streamin...
Page 54 - speech processing; wherein, the presence or absence of human speech is
54 Voice Activity Detection or Voice Activity Detector is an algorithm used in speech processing wherein, the presence or absence of human speech is detected from the audio samples. VLAN A virtual LAN, known as a VLAN, is a logically-independent network. Several VLANs can co-exist on a single physic...
