Graco TI12743a - Manual
Graco TI12743a – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Kits
- Page 3 – Installation; 5V821 Dump Valve Kit for Wall Panel
- Page 5 – 5V354 Third Flush Valve Kit for Wall Panel
- Page 7 – 5V202 Third Flush Valve Kit for RoboMix
- Page 10 – Schematic Diagrams; System Pneumatic Schematic
- Page 11 – Tubing Schematic
- Page 13 – Hazardous Area
- Page 14 – Parts
- Page 19 – Notes
- Page 20 – Graco Standard Warranty; Graco Information
312786G
EN
Instructions-Parts
Dump Valve and Third
Purge Valve Kits
For use with ProMix
®
2KS Electronic Proportioners. For professional use only.
See page 2 for kit part numbers and maximum working pressure.
Important Safety Instructions
Read all warnings and instructions in this manual. For complete
warnings and instructions see your proportioning system manual.
Hazard symbols refer to specific procedure risks. Save all instruc-
tions.
TI12743a
TI12954a
15V821 Dump Valve Kit
for Wall Panel
15V354 Third Flush Valve Kit
for Wall Panel, shown on
Fluid Mix Manifold
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Kits 2 312786G Kits 15V821 Dump Valve Kit For wall mount ProMix 2KS Electronic Proportioners 3000 psi (21 MPa, 210 bar) Maximum Fluid Working Pressure100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure See pages 3 and 14 15V822 Robo Dump Valve Kit For robo mount ProMix 2KS Electronic Proportioners...
Installation 312786G 3 Installation 15V821 Dump Valve Kit for Wall Panel NOTE: These instructions show this kit being installed on the A side. It may also be installed on the B side. 1. Shut off the fluid supply to the dose valve (V) at the front of the wall panel. 2. Actuate the dose valve to relie...
Installation 312786G 5 15V354 Third Flush Valve Kit for Wall Panel 1. Shut off the air and fluid supply to the ProMix 2KS. 2. Relieve pressure. See your ProMix 2KS Operation Manual. 3. See F IG . 4. Remove the air flush valve (AFV) from the fluid mix manifold (FM) and set it aside. 4. See F IG . 5. ...
