Graco TI12743a - Manuals - manualsarea.com

Page 2 - Kits

Kits 2 312786G Kits 15V821 Dump Valve Kit For wall mount ProMix 2KS Electronic Proportioners 3000 psi (21 MPa, 210 bar) Maximum Fluid Working Pressure100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure See pages 3 and 14 15V822 Robo Dump Valve Kit For robo mount ProMix 2KS Electronic Proportioners...

Page 3 - Installation; 5V821 Dump Valve Kit for Wall Panel

Installation 312786G 3 Installation 15V821 Dump Valve Kit for Wall Panel NOTE: These instructions show this kit being installed on the A side. It may also be installed on the B side. 1. Shut off the fluid supply to the dose valve (V) at the front of the wall panel. 2. Actuate the dose valve to relie...

Page 5 - 5V354 Third Flush Valve Kit for Wall Panel

Installation 312786G 5 15V354 Third Flush Valve Kit for Wall Panel 1. Shut off the air and fluid supply to the ProMix 2KS. 2. Relieve pressure. See your ProMix 2KS Operation Manual. 3. See F IG . 4. Remove the air flush valve (AFV) from the fluid mix manifold (FM) and set it aside. 4. See F IG . 5. ...

Page 7 - 5V202 Third Flush Valve Kit for RoboMix

Installation 312786G 7 15V202 Third Flush Valve Kit for RoboMix 1. Shut off the air and fluid supply to the ProMix 2KS. 2. Relieve pressure. See your ProMix 2KS Operation Manual. 3. See F IG . 8. Remove the plug (A) from the air flush valve (AFV). Install an o-ring (6) in this port. 4. Install the t...

Page 10 - Schematic Diagrams; System Pneumatic Schematic

Schematic Diagrams 10 312786G Schematic Diagrams System Pneumatic Schematic 3/8 AIR FILTER MANUAL DRAIN 5 MICRON WALL MOUNT ONLY FL USH AIR TO FL UID INLE T 1/4 TUBE TO M ANIFOLD 1/4 TUBE 4-WAY SOLENOID 12 VDC PURGE A VALVE DUMP A VALVE (OPTIONAL) 4-WAY SOLENOID 12 VDC 3-WAY SOLENOID 12 VDC 3-WAY SO...

Page 11 - Tubing Schematic

Schematic Diagrams 312786G 11 Tubing Schematic TI13862a TI13857a TI13858a A2 A4 A6 A8 A2 A4 A6 A8 B1 B3 B5 B7 B1 B3 B5 B7 13 13 DA DB DA DB TI13861a TI13860a TI13863a GFB1-C GFB2-C GFB1-S GFB2-S GFB1-P GFB2-P GFB1-A GFB2-A ATOM-1 ATOM-2 ATOM-1 ATOM-2 GFB1-C GFB2-C GFB1-S GFB2-S GFB1-P GFB2-P GFB1-A ...

Page 13 - Hazardous Area

Schematic Diagrams 312786G 13 System Electrical Schematic Hazardous Area HAZARDOUS AREA +12VDC I/S COM SHIELD J10 1 2 3 1 2 3 4 5 6 J3 PWR (RED) COM (BLACK) SIG (WHITE) SHIELD/GRN PWR (RED) COM (BLACK) SIG (WHITE) SHIELD/GRN PWR (RED) COM (BLACK) SIG (WHITE) SHIELD/GRN FLUID PANEL CONTROL BOARD FLUI...

Page 14 - Parts

Parts 14 312786G Parts 15V821 Dump Valve Kit for Wall Panel * Parts included in 16A079 Dump Valve Replacement Kit (purchase separately). † Order Kit 16A560 to replace a single seat. The kit includes a seat (11) and o-rings (4 and 14). NOTE: The standard valve seat (11) is SST. To install a carbide s...

Page 19 - Notes

Page 20 - Graco Standard Warranty; Graco Information

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Original instructions. This manual contains English. MM 312786 Graco Headquarters: Minneapolis Int...