Graco T1-Titanium - Manual
Graco T1-Titanium – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Pressure Relief Procedure; Spraying; WARNING; WARNING; Compliant Cleaning Methods; CAUTION; Troubleshooting
- Page 4 – Cleaning and Maintenance; Cleaning Gun; Gun Accessory Tools; Lube
- Page 5 – Maximum Air and Fluid Inlet Pressure:; Spray Gun; Problem; If pattern follows air cap,
- Page 6 – Parts; REF
- Page 8 – Description
SHARPE MANUFACTURING COMPANY • P.O. BOX 1441, MINNEAPOLIS, MN 55440-1441
1-800-742-7731, www.sharpe1.com
310584D, 4/2006
THE SPRAY GUN PEOPLE
FOR PRODUCT INFORMATION CALL:
1-800-742-7731
T1-Titanium
Non-HVLP Spray Gun
Maximum Fluid and Air Inlet Pressure:100 psi (0.7 MPa, 7 bar)
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Gun Part
No.
Needle/Nozzle
Size
Air Consumption
(CFM)
Recommended Usage
5430
1.2 mm
11*
Pressure feed production
5435
1.8 mm
13.8*
Medium solids, colors and clears
*
At 50 psi (345 kPa, 3.4 bar)
II 2 G
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 310584D T1-TITANIUM NON-HVLP SPRAY GUN Setup • Check that your shop air provides adequate air flow. • Use a minimum 5/16 in. ID air supply hose. • Set air and fluid pressure regulator according to paint man-ufacturer’s recommendation for conventional equipment. Do not exceed 100 psi (0.7 MPa, 7 ba...
4 310584D T1-TITANIUM NON-HVLP SPRAY GUNS Cleaning and Maintenance Volatile Organic Compounds (VOC) Regulation In certain states, spraying solvents that release VOC’s into the atmosphere when cleaning a spray gun is prohibited. To comply with these air quality laws you must use a cleaning method tha...
5 310584D T1-TITANIUM NON-HVLP SPRAY GUN Troubleshooting Technical Data Maximum Air and Fluid Inlet Pressure: 100 psi (0.7 MPa, 7 bar) Air Consumption: • Part No. 5430: 11 CFM at 50 psi (345 kPa, 3.4 bar) • Part No. 5435: 13.8 CFM at 50 psi (345 kPa, 3.4 bar) Wetted Parts: stainless steel, carbon st...
