Graco T1-Titanium - Manuals

Graco T1-Titanium – Manual in PDF format online.

Manuals:

Manual Graco T1-Titanium

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 3 - Pressure Relief Procedure; Spraying; WARNING; WARNING; Compliant Cleaning Methods; CAUTION; Troubleshooting

3 310584D T1-TITANIUM NON-HVLP SPRAY GUN Setup • Check that your shop air provides adequate air flow. • Use a minimum 5/16 in. ID air supply hose. • Set air and fluid pressure regulator according to paint man-ufacturer’s recommendation for conventional equipment. Do not exceed 100 psi (0.7 MPa, 7 ba...

Page 4 - Cleaning and Maintenance; Cleaning Gun; Gun Accessory Tools; Lube

4 310584D T1-TITANIUM NON-HVLP SPRAY GUNS Cleaning and Maintenance Volatile Organic Compounds (VOC) Regulation In certain states, spraying solvents that release VOC’s into the atmosphere when cleaning a spray gun is prohibited. To comply with these air quality laws you must use a cleaning method tha...

Page 5 - Maximum Air and Fluid Inlet Pressure:; Spray Gun; Problem; If pattern follows air cap,

5 310584D T1-TITANIUM NON-HVLP SPRAY GUN Troubleshooting Technical Data Maximum Air and Fluid Inlet Pressure: 100 psi (0.7 MPa, 7 bar) Air Consumption: • Part No. 5430: 11 CFM at 50 psi (345 kPa, 3.4 bar) • Part No. 5435: 13.8 CFM at 50 psi (345 kPa, 3.4 bar) Wetted Parts: stainless steel, carbon st...

Graco Manuals