Graco 3A0534F- User Manual
Graco 3A0534F– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instructions; Pressure Relief; Relieve pressure; pump element; Disassembly; Reservoir Disassembly; SKIN INJECTION HAZARD
- Page 3 – Upper O-Ring Disassembly; Lower O-Ring Disassembly Instructions; clockwise
- Page 4 – Reassembly; Lower O-Ring Installation; Top O-ring Installation; Follower Plate Installation
- Page 5 – Reservoir Installation
Instructions
G3 Reservoir and O-Ring
Replacement Kit
Instructions for replacing G3 reservoir and o-rings. For professional use only.
Part No.:
571042, 571069, 571179 - 2 Liter
models
571182, 571183 - 4 Liter models
Kit Parts 571179, 571182
Kit Parts 571042, 571069, 571183
Ref. Description
Qty
1
RESERVOIR
1
2
CAP, oil, fill
1
3
LABEL
1
4
O-RING
1
5
O-RING, square
1
2
1
3
4
5
Important Safety Instructions
Read all warnings and instructions in this
manual and the G3 Pump Instruction manual
included with your unit. Save these instruc-
tions.
Ref. Description
Qty
1
O-RING
1
2
RESERVOIR
1
3
LABEL
1
4
O-RING, square
1
1
2
3
1
4
3A0534F
EN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instructions 2 3A0534F Instructions Pressure Relief Relieve pressure in system by using two wrenches working in opposite directions on pump element and pump element fitting to only loosen fitting. NOTE: When loosening pump element fitting, do NOT loosen pump element . Loosening pump element will cha...
Instructions 3A0534F 3 3. Be sure parts remaining in reservoir were removed to reuse them for reassembly. 4. Examine follower plate seal referenced in Step 1 for wear or damage. If it is damaged, it must be replaced. Part No. 278139 is available from Graco. Contact customer service to order this par...
Instructions 4 3A0534F Reassembly Lower O-Ring Installation 1. Coat new o-ring (1) with grease (user supplied) and install o-ring in bottom groove of ricer plate (b). 2. Replace ricer plate (b), aligning circular sections with the round bosses in the base. NOTE: It may be necessary to use a press to...
