Graco 3A0534F- Manuals

Instructions 2 3A0534F Instructions Pressure Relief Relieve pressure in system by using two wrenches working in opposite directions on pump element and pump element fitting to only loosen fitting. NOTE: When loosening pump element fitting, do NOT loosen pump element . Loosening pump element will cha...

Instructions 3A0534F 3 3. Be sure parts remaining in reservoir were removed to reuse them for reassembly. 4. Examine follower plate seal referenced in Step 1 for wear or damage. If it is damaged, it must be replaced. Part No. 278139 is available from Graco. Contact customer service to order this par...

Instructions 4 3A0534F Reassembly Lower O-Ring Installation 1. Coat new o-ring (1) with grease (user supplied) and install o-ring in bottom groove of ricer plate (b). 2. Replace ricer plate (b), aligning circular sections with the round bosses in the base. NOTE: It may be necessary to use a press to...