Graco 3A0418E- User Manual
Graco 3A0418E– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING; FIRE AND EXPLOSION HAZARD; stop operation immediately.; Special Conditions for Safe Use
- Page 3 – PRESSURIZED EQUIPMENT HAZARD; Pressure Relief Procedure; EQUIPMENT MISUSE HAZARD; Technical Data
- Page 4 – PERSONAL PROTECTIVE EQUIPMENT; Protective eyewear, and hearing protection.; CALIFORNIA PROPOSITION 65
- Page 5 – Include - lubricator canister, grease and activation screw; MONTHS
- Page 6 – Cover lubrication point and lubricator with a; Component Identification; Canister cannot be refilled.
- Page 7 – Installation and Setup; YES; Installation Guidelines; Preparing for Installation; Checking the Counter Pressure; A 60 cc EM-Drive Lubricator containing
- Page 8 – Counter Pressure Test Procedure; no more than 5 seconds; NOTICE
- Page 9 – After flushing, repeat counter pressure test.; Grounding Clamp Installation; Insert lubrication canister inside grounding
- Page 10 – Example; Remote Mounting Installations; Direct Mounting
- Page 11 – With Tube and Grease; F Tube connection (User
- Page 12 – With Tube and Oil; F Tube connection (user
- Page 13 – Startup
- Page 14 – Activation; Activate the lubricator prior to installation.
- Page 15 – Canister Installation; Disposal
- Page 16 – Troubleshooting; Malfunction; No lubrication
- Page 17 – Grease dispensing too slowly
- Page 18 – Parts; Miscellaneous Accessories; Volume
- Page 19 – Dimensions
- Page 20 – Graco Standard Warranty; Graco Information
Instructions
EP-120 and EC-120
Lubricators
3A0418E
EN
For single point lubrication of sliding and roller bearings, chains, open gears, guideways
and other system components. For professional use only.
EP-120 Lubricators are used in areas that must be kept hygienically clean (e.g., food industry)
and in environments which are highly contaminated, highly corrosive, or are regularly humid.
EC-120 Lubricators are used in mining, steel and automotive industries, as well as in mechanical
and underwater applications.
58 psi (0.4 MPa, 4 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
I M2 c X
II 2G c IIC 80°C X
II 2D c 80°C X
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3A0418E Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equip-ment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual, refer ...
3A0418E 3 PRESSURIZED EQUIPMENT HAZARD Fluid from the equipment, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury. • Follow the Pressure Relief Procedure before cleaning, checking, or servicing equipment. • Tighten all fluid connections before operating the eq...
4 3A0418E PERSONAL PROTECTIVE EQUIPMENT You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This equipment includes ...
