Graco 3A0415D- Manual
Graco 3A0415D– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING; FIRE AND EXPLOSION HAZARD; stop operation immediately.; TOXIC FLUID OR FUMES HAZARD; Pressure Relief Procedure
- Page 3 – EQUIPMENT MISUSE HAZARD; Technical Data; PERSONAL PROTECTIVE EQUIPMENT
- Page 4 – Component Identification
- Page 5 – Installation and Setup; Determining Correct Mounting Method; YES; Preparing Lubricator for Installation
- Page 6 – no more than 5 seconds; ee
- Page 7 – Circuit Board Settings
- Page 9 – Changing the Dip Switch Setting; Selecting Mounting Location; Installation Guidelines; Direct Mounting Installation; Correct
- Page 10 – Remote Mounting Installations; Grease Lubrication with Tube
- Page 12 – Operation
- Page 13 – To begin the discharge:; Maintenance; Removing Lubrication Canister
- Page 15 – Lubrication Canister Disposal; Troubleshooting; Malfunction
- Page 16 – Parts
- Page 17 – Refill Kits
- Page 18 – Discharge Amount per Cycle
- Page 19 – Notes
- Page 20 – Graco Standard Warranty; Graco Information
Instructions
EM Drive
Lubricators
3A0415D
ENG
Provides a continuous, precise and temperature independent supply of grease or oil
lubrication to all lubrication points of sliding- and roller bearings, drive- and transport
chains, sliding guideways, open gears and seals. For professional use only.
Not approved for use in European explosive atmospheres.
75 psi (0.5 MPa, 5 bar) Maximum Working Pressure
This equipment is suitable for use in Class I,
Division 2, Groups A, B, C and D, Class II, Division
2, Groups F and G and Class III Hazardous
Locations or non-hazardous locations only.
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
EXPLOSION HAZARD
Substitution of components may impair
suitability for Class I, Division 2.
C
US
BAYZ,BAYZ7
92 UM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Graco 3A0415D
Summary
2 3A0415D Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equip-ment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual, refer ...
3A0415D 3 EQUIPMENT MISUSE HAZARD Misuse can cause death or serious injury. • Do not operate the unit when fatigued or under the influence of drugs or alcohol. • Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment...
Component Identification 4 3A0415D Pressure Relief Procedure 1. Cover lubrication point (A) and lubricator (B) with a heavy rag to absorb any fluid that may leak out while loosening the adapter. 2. Carefully unscrew support adapter (D) from the lubrication point (A). A Lubrication PointB Lubrication...
