Graco 310643u - Manual
Graco 310643u – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents; WARNING
- Page 3 – Service; Pressure Relief Procedure
- Page 4 – Disassembling the Pump
- Page 5 – Assembling the Pump
- Page 13 – Pump Packings
- Page 14 – Series A
- Page 17 – Technical Data
- Page 18 – Graco Standard Warranty; Graco Information
310643U
EN
Repair
Displacement Pump
Use only genuine Graco replacement parts. Use of non-Graco replacement parts may void
warranty.
3300 psi (22.7 MPa, 227 bar) Maximum Working Pressure
Model 248204, Series A
UltraMax II and Ultimate MX II 695/795
ASM Zip-Spray 2700 Plus, 3100 Plus
ASM AllPro Mach 8600 Plus and 11000 Plus
ASM H2700 Plus
Model 255968, Series A
ASM 3600G Plus
Model 248205, Series A
UltraMax II and Ultimate MX II 1095/1595
Model 249059, Series A
TexSpray Mark V
Model 249057, Series A
TexSpray Mark V
Model 277069, Series A
LineLazer IV 3900, R300
Model 277070, Series A
LineLazer IV5900
Model 253056, Series A
Mark IV
Model 257146, Series A
Ironman 300E and Ironman 500G
Important Safety Instructions
Read all warnings and instructions in this manual.
Be familiar with the controls and the proper usage
of the equipment. Save these instructions.
ti2311
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 2 310643U Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Parts - Pump 248204, 277069, 255968 . . . . . . . . . 14Parts - Pump 248205, 249057, 249059, 277070, 257146 ...
Service 310643U 3 Service Pressure Relief Procedure Follow the Pressure Relief Procedure whenever you see this symbol. 1. Engage trigger lock. 2. Turn ON/OFF switch to OFF. 3. Unplug power cord. 4. Disengage trigger lock. Hold metal part of gun against grounded metal pail and trigger gun into pail t...
Service 4 310643U Repair When Pump is Separated From Sprayer Disassembling the Pump 1. Remove packing nut (202) and o-ring (228). 2. Unscrew intake valve from cylinder. 3. Disassemble intake valve. Clean and inspect o-ring (227). NOTE: A pick may be required to remove o-ring. 4. Tap piston rod out o...
