Graco 308439C- User Manual
Graco 308439C– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; TRAY FILL INSTALLATION
- Page 3 – Installation Procedure; WARNING; Follow the Pressure Relief Procedure above.
- Page 4 – Installing a Split Outlet Manifold
- Page 5 – Parts; Torque Sequence
Installation – Parts List
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
Copyright 1994, Graco Inc. is registered to I.S. EN ISO 9001
Split Manifold Kits
Converts Husky
t
307 Diaphragm Pump to dual fluid inlet or outlet
Part No. 237210
For Husky 307 Polypropylene Pumps
Part No. 237211
For Husky 307 Acetal Pumps
308439C
Important Safety Instructions
Read all warnings and instructions in the manu-
al. Save these instructions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 308439 Installation The Split Manifold Kit enables you to convert theHusky 307 Pump to a dual fluid inlet manifold, dualfluid outlet manifold, or both. See Figs. 1, 2, and 3 forsome applications. To install the kit, see page 3. NOTE: To convert both the inlet and the outletmanifold, two kits are r...
308439 3 Installation Installation Procedure WARNING Pressure Relief ProcedureTo reduce the risk of serious injury, includingsplashing fluid or solvent in the eyes or on the skin,follow this procedure before installing this kit. 1. Shut off the air to the pump. 2. Open the dispensing valve, is used....
4 308439 Installation 03912 Fig. 4 1 Part of pump; not supplied in kit. 2 3 1 1 3 3 1 1 3 2 A A D A D A 1 1 1 Installing a Split Outlet Manifold Installing a Split Inlet Manifold B 1 B 1 C C 2 Apply thread lubricant. 3 Torque to 50–60 in-lb (5.6–6.8 N S m). Do not over-torque. 2 3 1 2 3 1 2 3 1 2 3 ...
