Graco 307619ZAA- User Manual

Graco 307619ZAA

Graco 307619ZAA– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
Page: / 24

Table of Contents:

  • Page 2 – EQUIPMENT MISUSE HAZARD
  • Page 3 – WARNING; SKIN INJECTION HAZARD
  • Page 4 – FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD
  • Page 5 – Installation; Prepare the Operator
  • Page 6 – Typical Installation
  • Page 7 – System Accessories
  • Page 8 – Operation; Pressure Relief Procedure; Flush the Pump Before First Use; Starting and Adjusting the Pump
  • Page 9 – CAUTION; Shutdown and Care of the Pump; Flushing the Pump
  • Page 10 – Troubleshooting
  • Page 11 – Service; Disconnecting the Displacement Pump; Reconnecting the Displacement Pump
  • Page 12 – Displacement Pump Service
  • Page 14 – Parts; Pump
  • Page 18 – Conversion Kits
  • Page 19 – Dimensions; Mounting Hole
  • Page 20 – Technical Data
  • Page 22 – Notes
Loading the manual

Instructions–Parts List

307619ZAA

ENG

HYDRA–SPRAY

R

Monark

r

and President

r

Pumps

For airless and air–assisted spraying of finishing materials.
For professional use only.

Important Safety Instructions
Read all warnings and instructions in this manual. Save
these instructions.

See page 2 for Table of Contents

Part No. 223596, Series B 23:1 Ratio Monark

r

Pump

with Part No. 223595 carbon steel severe–duty displacement pump*
with stainless steel glands, intake housing, piston valve, and ball stop

2760 psi (19 MPa, 190 bar) Maximum Fluid Working Pressure
120 psi (0.8 MPa, 8 bar) Maximum Air Input Pressure

Part No. 237958, Series B 23:1 Ratio Monark

r

Pump

with Part No. 239145 stainless steel
severe–duty displacement pump*

3450 psi (24 MPa, 238 bar) Maximum Fluid Working Pressure
150 psi (1.0 MPa, 10.4 bar) Maximum Air Input Pressure

Part No. 239140, Series A 46:1 Ratio President

r

Pump

with Part No. 239145 stainless steel
severe–duty displacement pump*

4600 psi (32 MPa, 317 bar) Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure

*

Severe–duty displacement pumps have abrasion–resistant

displacement rods and sleeves. Refer to Technical Data on
page 20 for information on the wetted parts.

Model 239140

06936

Model 223596

02097

II 1/2 G T3

ITS03ATEX11228

II 1/2 G T3

ITS03ATEX11228

II 2 G T6

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - EQUIPMENT MISUSE HAZARD

2 307619 Table of Contents Warnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshoo...

Page 3 - WARNING; SKIN INJECTION HAZARD

307619 3 WARNING SKIN INJECTION HAZARD Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and causeextremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skincan also cause serious injury. D Fluid injected into the skin m...

Page 4 - FIRE AND EXPLOSION HAZARD; TOXIC FLUID HAZARD

4 307619 WARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fire or explosion and serious injury. D Ground the equipment and the object being sprayed. Refer to Grounding on page 5. D If there is any static spar...

Other Graco Models

All Graco Other