Graco 24C728 B - Manual
Graco 24C728 B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings; WARNING
- Page 4 – Installation; Grounding
- Page 5 – Install the Agitator; Angled Adaptor
- Page 6 – Operation; Pressure Relief Procedure; Operate the Agitator; Check Fluid Viscosity; Maintenance; Lubricate the Air Motor
- Page 7 – Repair; Flush the Air Motor; Air Motor
- Page 8 – Parts
- Page 9 – Dimensions
- Page 10 – Technical Data
- Page 12 – Graco Standard Warranty
Instructions/Parts
AIR DRIVEN
Expanding Blade Mixer
Expanding blade bung-mounted agitator for maintaining suspension and even mixing in
industrial paints and coatings. For professional use only.
Not approved for use in European explosive atmosphere locations.
Model 24C728, Series B
Low Viscosity, up to 1000 centipoise
Model 24C729, Series B
High Viscosity, up to 2000 centipoise
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
Contents
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . .10
Graco Standard Warranty . . . . . . . . . . . . . . . . .12
Graco Information . . . . . . . . . . . . . . . . . . . . . . .12
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
ti14646A
313643G
EN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings 2 313643G Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. When these symbols appear in the body of this manual...
Installation 4 313643G Installation NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and in the parts drawing. Grounding The equipment must be grounded. Grounding reduces the risk of static and electric shock by providing an escape wire for the elec...
Installation 313643G 5 Install the Agitator 1. Due to variability in drum heights the lowest set of blades may contact the bottom of the drum. If the bung adapter will not fully seat, or if resistance is felt when installing the agitator, move the blades up the shaft. To move the blades, loosen the ...
