Graco 12 VDC - Manual
Graco 12 VDC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Models
- Page 4 – Warnings; WARNING
- Page 6 – Installation; Mounting Pump
- Page 7 – Mounting Hose and Nozzle
- Page 9 – Priming Pump; If prime is lost; Operation
- Page 10 – Troubleshooting
- Page 12 – Parts Drawing
- Page 13 – Parts List
- Page 15 – Technical Data; Performance Chart
- Page 16 – Graco Standard Warranty; Graco Information
311304H
Instructions - Parts List
GTP10 Pump
For pumping gasoline, diesel fuel, and kerosene. Do not use to pump other fluids including
water.
Models 260000 through 260017, 260019, 260024, 260580, and 260581
10 gpm (38 lpm), 12 VDC (CSA C/US listed motor)
Models 260020 and 260021, 10 gpm (38 lpm), 24 VDC
Models 260022 and 260023, 12 gpm (45 lpm), 230 VAC
Models 260025 through 260028
12 gpm (45 lpm), 115 VAC (CSA C/US listed motor)
10 psi (0.07 MPa, 0.7 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
CSA mark applies only to 12 VDC
and 115 VAC motors for Class I, Div
I, Group D Hazardous Locations
EN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Models 2 311304H Models Part No. Hose Nozzle 12 VDC, 10 gpm (38 lpm), 12.5 amps 260000 260069 - 12 ft (3.66 m) grounded 260079 - manual, leaded/diesel 260001 260069 - 12 ft (3.66 m) grounded 260082 - automatic, regular/diesel 260002 260069 - 12 ft (3.66 m) grounded 260078 - manual, unleaded 260003 2...
Warnings 4 311304H Warnings The following general warnings are for the setup, use, grounding, maintenance, and repair of this equipment. Addi-tional, more specific warnings may be found throughout the body of this manual where applicable. Symbols appear- ing in the body of the manual refer to these ...
Installation 6 311304H Installation When unpacking pump, check for shipping damage. Report any shipping damage to delivering carrier imme-diately. Mounting Pump 1. Apply PTFE thread tape (provided with the pump) to large thread of bung adapter (9) (2 in. X 1 ½ in. reducer fitting). Install bung adap...
