Giant P420A-3100 - Manual
Giant P420A-3100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION INSTRUCTIONS; F, it is important to insure a positive head; IMPORTANT OPERATING CONDITIONS; Crankcase oil should be changed after the
- Page 3 – In order to drive the pump from the side opposite the present shaft; We recommend a 1.15 service factor; REQUIREMENTS; Specifications
- Page 7 – Contact Giant Industries or your local; 3) Generously lubricate
- Page 8 – GIANT INDUSTRIES LIMITED WARRANTY
Contents:
Installation Instructions:
page 2
Specifications:
page 3
Parts List/Torque Specs:
page 4
Exploded View/Kits:
page 5
Repair Instructions:
pages 6-7
Dimensions:
back page
Warranty Information
back page
Corrossion Resistant Pumps
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service
Manual
Models
P420A-3100
& P420A-5100
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION INSTRUCTIONS 4. Use of a dampener is necessary to minimizepulsation at drive elements, plumbing, connec-tions, and other system areas. The use of adampener with Giant Industries, Inc. pumps isoptional, although recommended by GiantIndustries, Inc. to further reduce system pulsa-tion. Da...
NOTES: 1 In order to drive the pump from the side opposite the present shaft extension, simply remove the valve casing from the crankcase androtate the pumps 180 degrees to the desired position. Be certain torotate the seal case (item #20) as well, so that the weep holes aredown at the six o'clock p...
9) Check surfaces of plunger pipe (16B). REASSEMBLY INSTRUCTIONS - P420A-3100/5100 PUMPS 11) Place pressure rings and weep seals (23B) overplungers and into each sealcase (20). 12) Place weep return rings (25) over the plunger (16) andpressure ring over plunger(24). Contact Giant Industries or your ...
