Giant P220 - Manual
Giant P220 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION INSTRUCTIONS; IMPORTANT OPERATING CONDITIONS
- Page 3 – P217A HORSEPOWER REQUIREMENTS; Specifications; *Pressure washer duty only
- Page 4 – P218A HORSEPOWER REQUIREMENTS
- Page 5 – P219A HORSEPOWER REQUIREMENTS
- Page 6 – P220A HORSEPOWER REQUIREMENTS
- Page 7 – P221 HORSEPOWER REQUIREMENTS
- Page 8 – REQUIREMENTS
- Page 9 – P200A SERIES PARTS LIST
- Page 10 – Exploded View - P200A Series
- Page 12 – REPAIR INSTRUCTIONS - P200A SERIES
- Page 14 – PUMP SYSTEM MALFUNCTION
- Page 15 – NOTES
- Page 16 – GIANT INDUSTRIES LIMITED WARRANTY
Series
P200A
Updated 6/00
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service
Manual
For Models:
P217
P218
P219
P220
P221
P223
Contents:
Installation Instructions:
page 2
Pump Specifications:
pages 3-8
Parts List:
page 9
Exploded View:
page 10
Kits & Torque Specifications: page 11
Repair Instructions:
pages 12-13
Trouble Shooting:
page 14
Notes & Dimensions:
page 15
Warranty Information:
back page
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION INSTRUCTIONS 4. Use of a dampener is necessary to minimizepulsation at drive elements, plumbing, connec-tions, and other system areas. The use of adampener with Giant Industries, Inc. pumps isoptional, although recommended by GiantIndustries, Inc. to further reduce system pulsa-tion. ...
3 P217A HORSEPOWER REQUIREMENTS RPM GPM 1000 PSI 1500 PSI 2000 PSI 2500 PSI*1725 1.7 1.2 1.8 2.4 3.0 3000 3.0 2.1 3.1 4.2 5.2 3200 3.2 2.2 3.3 4.4 5.5 3450 3.4 2.3 3.5 4.7 5.9 Specifications Model P217A NOTE: In order to drive the pump from the side opposite the presentshaft extension, simply remove...
4 NOTE: In order to drive the pump from the side opposite the presentshaft extension, simply remove the valve casing from the crank-case and rotate the pumps 180 degrees to the desired position.Be certain to rotate the seal case (item #20) as well, so that theweep holes are down at the six o'clock p...
