Geemarc Ampli DECT150 - Manual

6 LCD display Afficheur LCD Keypad Clavier Amplifier switch Interrupteur ampli Shaker switch Interrupteur vibreur Speaker Ecouteur Microphone Function and phonebook keys Touches de fonction et de répertoire Amplifier key Touche ampli Tone adjustment Réglage de la tonalité Flash Key Touche flash Pick...

10 GENERAL SETTINGS 1 - HOW TO CONNECT THE PHONE AND SET THE BATTERIES 1 - Plug the adaptor in the power wall socket and the power plug in the base socket (*). 2 - Connect the line cord plug to the base socket (**).3 - Connect the line cord to the PTT socket.4 - Insert the batteries with the correct...

BASE SETTINGS BASE RINGER VOLUME The base ringer volume can be adjusted by using the slider switch located on thebase rear panel. Remark: It is only possible to adjust the ring volume, the ring tone melody cannot be adjusted. The following settings are available: Switch position Symbol Function Pos ...

HANDSET SETTINGS 1 - GENERAL SETTINGS ICONS DIPSPLAYED There are three settings icons displayed on the handset: Ringer volume icon to set the ring volume and melody. Register handsets icon to register / deregister handsets. Network settings, Flash time and Dial Pause icon settings to set Network, Fl...

USING THE PHONE 16 1 - MAKING A CALL 1 - Dial the phone number you want to call, you can press the key to cancel an incorrect entry.2 - Press the , the number is automatically dialled. 3 - On completion of the call simply press the again to release the line or put the handset on the base. 2 - ANSWER...

PHONE BOOK 18 1 - ABOUT THE PHONE BOOK Names and phone numbers can be stored in the phone book. Each phone numberstored in the phone book can be called by pressing only few buttons. If your Caller IDservice is available, the name and the number of the caller will be displayed duringthe incoming call...

ADDITIONAL HANDSETS 23 1 - GENERAL SETTINGS With the DECT standard you have the possible settings below:- Register up to 4 handsets to one base unit.- Register up to 2 base units to each handset.- Make internal call handset to handset and transfer call between handsetsregistered to the same base uni...

ADDITIONAL BASE UNIT 26 1 - GENERAL SETTINGS Several base units can be connected to the network in order to extend the range ofthe handsets. When several base units are registered to a handset, it canautomatically search for the next base unit if you go outside the range of the firstbase unit. The t...

27 TROUBLE SHOOTING IF THE PHONE DOES NOT WORK Generality: Make sure that the phone line cord and adaptor are correctly plugged in and are notdamaged.Make sure that the batteries are fully charged.Connect another phone on your phone socket or move your phone to another socketto check if the failure ...