Geemarc CL400 - Manual

2 - LCD SCREEN Screen example (On hook position) - OK key is used to confirm action or a choiceon the screen.- keys are used to scroll through the menu. - In general, the C key is used to cancel an action/entry, it can also be used to confirm a choice (forexample to cancel a stored number). DESCRIPT...

DESCRIPTION 3 - SCREEN DISPLAY Your CL400 has a screen with different iconswhich help you to use the telephone. The telephone is supplied by battery+ battery indicator The telephone is supplied by adaptor Memory storing is required. Screen contrast level. “Mute” is activated. Speaker is activated. P...

INSTALLATION 1 - CONNECTING - Connect the handset.- Open the battery compartment.- Insert 4 alcaline batteries without mercury (AAA1.5V type not supplied) with good polarity into thecompartment located on the telephone base. Note : Do not use a rechargable battery, do notput the battery into the hou...

1 - RINGER SETTINGS A switch located on right side allows the ringer tobe switched HI,LOW,OFF: : Off: Low: Hi Your phone comes with the ringer switched to«High».If you don’t like the ringer melody,you can choosea new one by changing the settings between foursettings as follow: In on hook position,- ...

2 - ALARM AND RINGER SETTINGS A 3 position switch located on the right side of thephone allows the settings below: - : Ringer and strobe flash are activated. - : Ringer and shaker are activated. - : Ringer, shaker and strobe flash are activated. 3 - DIALLING MODE (T/P) The Tone/Pulse switch is facto...

4 - NEW CALL INDICATOR & HOTELMESSAGE WAITING SWITCH Hotel message waiting is used with the newservices provided on hotel network. The New callindicator is used to indicate a new incoming call.A switch located on the base of your phone allows to set ON/OFF the hotel message waitingor new call li...

- Press the OK key to confirm.- Select «DATE FORMAT».- Press the OK key to confirm.- Select «DAY-MONTH» or «MONTH-DAY».- Press the OK key to confirm.- Press the C key twice to exit. Hour format You can choose between two formats:12 hours or 24 hours. In on hook position,- Press the key. Use the or k...

6 - DATE AND HOUR SETTING In on hook position,- Press the key. - Use the or keys to select «SET TIME». - Press the OK key to confirm.- Use the or keys to select the desired digit.- Press the OK key to confirm and pass to the nextdigit.You will set the time like this:HOURS - MINUTES - MONTH - DAY- Pr...

10 - DIM:X---->x If the auto-screen sizing is activated, the screencan display up to 18 digits of the number you dial,otherwise only 8 digits will be displayed on thescreen. In on hook position,- Press the key. - Use the or keys to select «SET PHONE». - Press the OK key to confirm.- Use the or ke...

11 - TIME BREAK RECALL SETTING “R”FUNCTION Your phone works with a time break recall for Uni-ted Kingdom (R=100ms).If you wish to change this value, follow instruc-tions below: In on hook position,- Press the key. - Use the or keys to select «SET PHONE». - Press the OK key to confirm.- Use the or ke...

USING THE PHONE Your CL400 allows you to speak hands free,surrounding people can also hear the conversation. 1 - ANSWER A CALL During an incoming call, your phone will ring andthen the Number or/and the Name of the caller isdisplayed on the screen, if you have subscribed tothe CID service. 1st solut...

2 - MAKE A CALL 1st solution - Lift the handset.- Await the dial tone and dial required number( thenumber is displayed on the screen).- On completion of the call,carefully replace thehandset in the cradle to clear the line. 2nd solution (Pre-dialling) - Dial the required number in the on hook positi...

3 - USE THE AMPLIFIER During a call, if you wish to use the amplifierfunction with the speaker phone:- Press the key.- Adjust the sound level with the VOLUME slidebutton located on the left side of your telephone.During a call, if you wish to use the «hands free»function:- Press and hold the key and...

USING THE PHONE 9 - STORE A TELEPHONE NUMBER INMEMORY Your phone can store 8 direct memories including3 priorities numbers (30 digits maximum for eachmemory).For example, the 3 priority P1, P2, P3 memoriesallow you to store the 3 numbers below: - Local,Police station, - Your doctor- 1471 To store a ...

10 - DIALLING STORED NUMBERS - Lift the handset or press or and await the dial tone.- Press appropriate button M1, M2, ..., or M8 orone of the 3 priority P1, P2, P3 numbers, the storednumber will be dialled automatically.To register yourstored phone numbers,use the index card locatedunder the base.U...

You have three possibilities to use: 1st solution: Press the to activate the neckloop and headset, speak into the headset microphone. 2 nd solution: Press the to activate the neckloop and the amplifier, speak into the microphone located onthe base. 3 rd solution: Lift the handset and speak into the ...

shaker plug in the socket located at the back of your phone.When an incoming call is received,the shaker will be activated during ringing. Note: This option must be set in the ALARM ANDRINGER OPTIONS item (page 12) to be activated.Important: For your security, only connect theGeemarc SHAKCL_WH model...

1 - V O L U M E A N D TO N E R E C E I V I N GADJUSTMENT You can increase the volume and adjust thereceiving tone according to your own hearingrequirements.The button allows extra- receiving and tone functions to be activated duringthe conversation.When the function is activated, the red light ofext...

Note: When the tone (treble), earpiece volume andsending levels are set to the maximum, whistlingmay appear. If whistling occurs the sending levelsettings should be decreased (sending level switch located on the right side). When the switch located behind the phone is ON, the extra-receivingand tone...

1 - CREATE A PHONE BOOK ENTRY You can store 99 entries into the phone book withthe name and phone numbers of your correspon-dant. In on hook position,- Press the key. - Use the or keys to select «PHONE BOOK». - Press the OK key to confirm.- Select «ADD».- Press the OK key to confirm.- Enter the numb...

1 . ? - " ' < 1 2 A B C a b c 2 E O 3 D E F d e f 3 4 G H I g h i 4 5 J K L j k l 5 6 M N O m n o 6 O O 7 P Q R S p q r s 7 8 T U V t u v 8 U 9 W X Y Z w x y z 9 0 0 + & @ / $ % Ke y Ch aracte r s Ke y Ch ara ct e rs - To insert a «space», press on the OK key twice.- If the next letter is...

38 - Press the C key to modify the number and insertnew number.- Press the OK key.- You can now modify the name.- Press the C key to delete a letter.- For help see the «CREATE A PHONE BOOKENTRY» p.34 to modify the name.- Press the OK key for 3 seconds to confirm thenew entry.- Press the C key to exi...

Note : You can review the incoming call list during a call by pressing the OK key, then use the & keys to move through the phone book list. 1 - USE THE INCOMING CALL LIST Associated with the CID feature, the call list allowsyou to store the incoming calls. When the call listmemory is full, a new...

If the number is unknown from the telephone center(international incoming call for example), the screenwill display OUT OF AREA: When the same caller calls several times, only thelast call will be stored into the incoming call list andthe screen will display +. Note : During the entries review, the ...

To review the new calls, use the & keys. When all new calls havebeen reviewed, the new callLED will disappear and the screen will come back to idle state after a fewseconds.The total number of incoming call entrieson the incoming call list will still be displayed on thescreen. When the incoming ...

- Lift the handset or press the or the keys. - The number will be dialled automatically. Lift the handset, - Use the or keys to move into the list and select the required number to dial.- Press the OK key.- The number will be dialled automatically. Note : The call back function from incoming call li...

- Press the OK key to exit. 4 - DELETE ALL RECORDS FROM THE CID LIST In on hook position, - Press the or keys. - Press and hold the C key until the screendisplays «ALL DEL?».- Press the C key to confirm. 5 - CALL WAITING With this service, you are made aware that a newc a l l i s c o m i n g t h r o...

In on hook position,- Press the key. - Use the or keys to select «SET PHONE». - Press the OK key.- U s e t h e o r k e y s t o s e l e c t « CALL WAITING».- Press the OK key.- Use the or keys to select «ON». - Press the OK key and then C twice to exit. Note : When the call waiting function is activa...

A beep tone will be heard when a second call isincoming. Caller N°2 CID information will bedisplayed on the screen (Name and Number). For more information about the «CALL WAITING»service contact your network provider. Note : If you don’t answer call N°2, the call will berecorded into the incoming ca...

6 - MESSAGE WAITING This system provides the capability of the caller toleave a message. You will be informed of an incoming call by theincoming call list that you have a message. Thiscall is distinguished from other calls and screendisplays «MSG WAITING», the message waitingLED is activated. Note :...