Geemarc TP38 - Manual - manualsarea.com

Page 2 - Plug the other end of the coil cord into the jack of the handset.; Fitting the desk Support

2 1. INSTALLATION 1.1 To Install the Batteries Batteries are required for the Caller ID function and telephone operation of the unit.To open the battery door and install the batteries, follow the procedure below :1. Open the battery door by pulling back the latch.2. Insert four (4) AAA alkaline batt...

Page 4 - TELEPHONE Operation; Speaker Volume Control

4 3. TELEPHONE Operation 3.1 Dialling a Call 1. Pick up the handset or press button (the speaker LED will light and the dis- play will show “ ”) and wait for a dial tone. 2. Press the keypad for the telephone number you wish to dial. The display will show the number that you dialled on the keypad. I...

Page 5 - Hearing Aid Compatibility; This unit is compatible with inductively coupled hearing aids.

5 3.5 Redial To redial the last number called:1. Lift the handset or press button. 2. Press the REDIAL button. Noted : The last number dialed manually (up to 32 digits long) can be redialed. 3.6 Pause You can insert a 3.6 seconds pause into dialing or storing a number into memory inorder to access c...

Page 6 - The Phone Book; To Store Telephone Numbers & Names in the Phone Book; you how to enter names.; How to enter names; P Q R S 7

6 4 The Phone Book IMPORTANT: When using the phone book features, please note it is only avail-able at data bank mode (CLIP icon turns off). If the CLIP icon is on, pressCALLER ID/DATA BANK button once. You can store 100 telephone numbers with associated names in the phone book.When the memory capac...

Page 7 - connection will be made.; To Edit the Phone Book Memory; return to standby mode.

7 4.3 To review the Phone Book Memory Enter the initial letter of the name of the person you wish to call using the numberpad. After a short time, the display will show the first stored telephone number withthis initial letter. You can now search for further numbers under this letter by turningthe j...

Page 8 - To Delete the Phone Book Memory; To delete single memory; The Caller ID

8 4.5 To Delete the Phone Book Memory 1. Select the required location from the phone book by rotating the jog dial.2. To delete single memory , press DELETE button once. The display will show the “DELETE?”. Press DELETE button for 2 seconds. The telephone number andname will be deleted and the displ...

Page 9 - date will be updated and the “REPEAT” icon will be lit.; View the Caller ID Memory

9 • If the name and number are not available due to the caller’s restriction, the dis- play shows “PRIVATE” with the time and date received. The NEW icon turns onand NEW CALL LED blinks. • If the name and number are not available, the display will show “UNAVAILABLE” with the call’s time and date. Th...

Page 10 - Erase the Caller ID Memory; Copy from the Caller ID to the Phone Book

10 5.3 Erase the Caller ID Memory 1. Select the required Caller ID memory location by rotating the jog dial.2. To delete single memory , press DELETE button once. The display will show the “DELETE?”. Press DELETE button for 2 seconds. The data for that call will beerased, and the CALL# and Caller ID...

Page 11 - General Information; Please note; : The guarantee applies to the United Kingdom only.

11 6 General Information 6.1 Approval The apparatus is approved for connection to direct exchange lines and to approved,compatible PABX’s. It cannot be guaranteed that the apparatus will operate cor-rectly under all conditions when connected to some PABX’s. If difficulties are expe-rienced, please c...

Page 12 - For product support and help visit our website

UGTP38CLIP / ED01 For product support and help visit our website at www.geemarc.com telephone 01707 384438 or fax 01707 372529 LIB955YY