GE IC5002 - Manual

Contents vi Intelligence Panel PC User's Manual–August 2003 GFK-2023C External Keyboard ............................................................................................. 6-2 Front Panel LEDs .............................................................................................. 6-...

GFK-2023C 1-1 Product Features The Intelligence Panel industrial PC is designed to meet the demands of advanced control and monitoring architectures. All GE Fanuc industrial computers meet industrial requirements for factory automation applications, including extended temperature, shock and vibratio...

1-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 1 Bundled Solutions The Intelligence Panel PC is available as a bundled system with the HMI or Control application software of your choice, such as CIMPLICITY® HMI, Intellution iFIX, or CIMPLICITY Machine Edition, launched from Windows ...

1-4 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 1 Technical Support GE Fanuc provides a single resource for all your services and support needs including technical software support, product training, and complete application consultation and development services. Phone: 1-800-433-268...

GFK-2023C Chapter 1 Product Features 1-5 1 Contents of the Intelligence Panel PC Package Check that one of each of the following items is included in the package with your Intelligence Panel PC: ■ Industrial flat panel PC ■ Conventional power cable and plug ■ Hazardous Environment power cable and pl...

GFK-2023C 2-1 Safety Instructions Warning This equipment carries electric currents and contains highly-sensitive components. Other than plugging in additional cards or modules, you should not attempt modifications to the unit. If other modifications need to be made, the manufacturer or an authorized...

2-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 2 Damage Resulting from Inappropriate Use If the Intelligence Panel displays signs of damage caused by inappropriate operating/storage conditions, mounting, or incorrect handling, the unit must be taken out of use immediately and secure...

GFK-2023C 3-1 Installation Intelligence Panel PCs are designed for installation in switchboard panels and cabinet doors. To facilitate installation and access to connectors, switchboard panels and consoles must be accessible from the rear. The unit can be installed in switchgear cubicles or cabinets...

3-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 3 Installation Procedures 1. Make a cut-out (corresponding to size of the particular unit) in the switchgear panels or cabinet doors (see Figures 3-1 through 3-3). 2. Insert the unit into this cut-out from the front. 3. Insert the mount...

GFK-2023C Chapter 3 Installation 3-3 3 0 260 330 0 134 268 70 158 Outer edge of cover Dimensions:Cover:Mounting depth:Space required for cooling: Recess: 6x Mounting blocks M4 View from back side 313 x 252 mm (W x H)83 mmApproximately 50 mm around the unit 318 x 256 mm +1,0 (W x H) Outer edge of fro...

3-6 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 3 Hazardous Locations Installation Warning When installing the unit in an environment where there is the potential for flammable gases, vapors or liquids to be present the power cable must be secured to the unit using the enclosed cable...

GFK-2023C 4-1 Installing Plug-in Modules PCI bus or ISA bus plug-in modules, such as network or field bus cards, can be installed in the Intelligence Panel. The plug-in slots are accessed by removing the rear cover, which is secured by cross-head screws. Avoiding Electrostatic Discharges Caution The...

4-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 4 Caution The rear cover is connected to the base units of the Intelligence Panel by a plug-in ground connector and cable. Carefully remove and orient the rear cover to avoid applying unnecessary tension on this cable. 3. Select a free ...

GFK-2023C Chapter 4 Installing Plug-in Modules 4-3 4 Configuring Expansion Cards (Legacy ISA Only) Caution For most applications, an interrupt request (IRQ) or address cannot be shared by more than one resource. If more than one resource is set to the same IRQ or address, the application may not res...

GFK-2023C 5-1 System Operation This chapter covers the following topics: ■ Initial startup procedure ■ System startup for W indows NT ■ System startup for W indows 2000 ■ Login ■ Installing Application Software ■ Image Recovery ■ Shutting Down the Computer Initial Startup Procedure Warning Installat...

5-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 5 System Startup for Windows NT Units Connecting a PS/2 keyboard and mouse is recommended before you get started. You need a PS/2 keyboard for convenience. An alternate approach is to use the soft keyboard and touch panel. 1 . Plug in t...

GFK-2023C Chapter 5 System Operation 5-3 5 System Startup for Windows 2000 Units Connecting a PS/2 keyboard and Mouse is recommended before you get started. You need a PS/2 keyboard for convenience. The soft keyboard and touch panel will not work until the Windows 2000 operating system is licensed. ...

5-4 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 5 Login Recommendation With Windows NT, if you type admin as your Administrator password, your industrial computer will automatically log on as Administrator. Log onto the system as Administrator when you power up the system. Doing so e...

GFK-2023C Chapter 5 System Operation 5-5 5 Image Recovery The IPC features a hidden partition on the hard drive that contains an OS recovery image. This image can be used to recover a corrupt OS. Instructions for OS recovery: Warning Before attempting an Image Recovery on your unit, make sure to rec...

GFK-2023C 6-1 Controls Control Keys Intelligence Panel PCs are shipped with the W indows NT or Windows 2000 operating system installed. Additional pre-installed software includes drivers to support the virtual keyboard. In case you need to re-install the software, CDs and floppy disks are included w...

6-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 6 Softkeyboard A virtual keyboard that allows you to enter data using the TouchScreen in a similar way to a normal keyboard is supplied with the Intelligence Panel. If the Intelligence Panel is delivered without an installed operating s...

GFK-2023C Chapter 6 Controls 6-3 6 Front Panel LEDs PWR LED When the S HIFT key is used to adjust the display settings, the LED goes out. If one of the other four keys is also pressed, the LED flashes until the limit of the adjustment range is reached. The following modes are also displayed: ■ Green...

6-4 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 6 Mouse A Microsoft-compatible mouse with PS/2 connector can be attached to the Mouse port. The compatibility of the mouse must be checked before use. The mouse can be used in addition to the TouchScreen. Note: It is recommended that yo...

GFK-2023C Chapter 6 Controls 6-5 6 Ports A USB port is provided on the front of the operating console. All other ports are arranged in the housing on the left of the operating console (viewed from the front). All ports are labeled. For pin assignments, refer to chapter 8, “Technical Data”. Caution T...

6-6 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 6 COM 3 COM 1 Ethernet USB COM 2 LPT 1 PS/2 Mouse CRT PS/2Keyboard FloppyDisk Drive CD-ROMDrive PCI/ISA (2) andISA slots Figure 6-3. Expansion and Communications Ports, 15" and 18" Intelligence Panels Networking The Intelligence...

GFK-2023C Chapter 6 Controls 6-7 6 Connecting an External Monitor A CRT-Multisync monitor can be operated from the 15-pin monitor connection in parallel with the integral flat screen. The monitor must be capable of running at a minimum horizontal frequency between 31-69 kHz, otherwise the maximum re...

GFK-2023C 7-1 Driver Installation Intelligence Panel PCs are shipped from the factory with the W indows operating system pre-installed. Depending on the product purchased, CIMPLICITY software is also preinstalled. For configurations where no operating system is installed or the operating system need...

7-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 7 Caution If selecting DHCP, the IPC must be connected to the DHCP-supported network. 7. Click Next to define settings for the network protocol desired by the specific user and the operating mode (default setting: (1) Auto). If selectin...

GFK-2023C Chapter 7 Driver Installation 7-3 7 6. Click Control Panel => Display => Settings and select the desired screen resolution. Max. resolution: 800x600 (12" Display) 1024x768 (15" Display) 1280x1024 (18" Display) Max. color at highest resolution: 16 million colors (12" D...

7-4 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 7 UDMA Driver Installation To ensure that the hard disk and CD-ROM drive run at maximum speed, the UDMA driver for the VIA chip set must be installed. The driver can be found on the “SBC Drivers, Utilities & User Manuals” CD. Instal...

GFK-2023C Chapter 7 Driver Installation 7-5 7 Regional Settings You can subsequently adapt the key assignment of your virtual keyboard to the standard layouts of other countries. The settings are stored in an INI file. To change the settings, you will need to modify the file in a text editor such as...

GFK-2023C 8-1 Technical Data Monitor System IC5002/BC5002 IC5005/BC5005 IC5008/BC5008 Display: TFT LC-Display Diagonal: 307.4 mm (12.1") 383.5 mm (15.1") 459.7 mm (18.1") Resolution (Pixel): SVGA (800 x 600) XGA (1024 x 768) SXGA (1280 x 1024) VGA controller: (AGP) 2MB SDRAM (AGP) 2MB SD...

8-2 Intelligence Panel PC User’s Manual – August 2003 GFK-2023C 8 Expansion Cards The maximum power consumption of additional expansion cards should not exceed 20 watts to avoid overheating. The IC5005/BC5005 and IC5008/BC5008 models support full length cards size (339 mm). The IC5002/BC5002 models ...

GFK-2023C Chapter 8 Technical Data 8-3 8 Port Configurations Port IRQ Addresses COM1 4 3F8h COM2 3 2F8h COM3 5 3E8h COM4 (Touch) 10 2E8h LPT 7 378h Pin Assignments Keyboard/Mouse (6-pin mini-DIN PS/2 socket) Pin Number Signal name 1 Data 2 NC 3 GND 4 +5V 5 Clock 6 NC COM1/2/3 Serial Port (9 pin sock...

GFK-2023C Chapter 8 Technical Data 8-5 8 BIOS Settings BIOS settings are available through the GE Fanuc web site URL http://gefanuc.com/ . Unit Troubleshooting For current troubleshooting and frequently asked questions, go to the GE Fanuc web site URL: http://gefanuc.com/ . Touchscreen Troubleshooti...

Index GFK-2023C Index-1 A Air flow, 3-1 Application software installing, 5-4 Auto logon, 5-2 B BIOS settings, 8-5 Bundled solutions, 1-2 C Calibration touchscreen, 5-4 CD-ROM drive, 6-4 CIMPLICITY Machine Edition, 1-2 Control drawing CD-E219479 nonincendive field wiring, 3-7 Control keys, 6-1 softke...