Fujitsu M3000 - Manual

Fujitsu M3000

Fujitsu M3000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – Note –; Installation Steps for SPARC Enterprise M3000 Server; SPARC; Prepare items required for installing the server.; See the; Caution –; Connect the power cords to the power supply system.; SPARC Enterprise M3000 Server Installation Guide; Administration
  • Page 3 – Rear Panel of the Server; connect the administration console to the serial port (see; Be careful not to connect a LAN cable to the serial port.; Power supply unit; AC Power Supply Model
  • Page 4 – a. Set the mode switch on the operator panel to the Service mode (; The key for the mode switch is supplied with the server.; Operator Panel; c. After the XSCF initialization completes, enter; A login authentication timeout will occur after one minute.; POWER LED; default; Leave it in that position for at least 5 seconds.
  • Page 5 – The following steps will power on the server.; This switches you from the XSCF Shell to the domain console.; ) on the operator panel to power on the server.; The ok prompt is displayed after the self-diagnosis completes.; Date and time settings; Altitude administration setting; Dual power feed option setting
  • Page 6 – This switches you from the domain console to the XSCF Shell.; fmdump; connected to the system control network.; To switch from the XSCF console to the ok prompt, enter the; showhardconf
  • Page 7 – Oracle VTS User’s Guide; Make the initial settings for the domain.; For details, see the; boot
  • Page 8 – FUJITSU LIMITED; Documentation Feedback
Loading the manual

1

Accessing Important Information and Documentation

Before you deploy the SPARC Enterprise M3000 server, check for late breaking information about patches for
firmware and software, and known issues. This information, found in the

SPARC Enterprise M3000/M4000/M5000/

M8000/M9000 Servers Product Notes

, supersedes the information in other documents. The latest version of

SPARC

Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes

,

SPARC Enterprise M3000 Server Installation Guide

,

and other documentation for the M3000 server are available on the following website:

http://www.fujitsu.com/sparcenterprise/manual/

SPARC Enterprise M3000

Server

Documentation

System
Planning and
Site Preparation

• SPARC Enterprise M3000 Server Overview Guide
• SPARC Enterprise M3000 Server Site Planning Guide
• SPARC Enterprise Equipment Rack Mounting Guide

System
Installation

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes
• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Important Legal and Safety

Information (Printed)

• SPARC Enterprise M3000 Server Safety and Compliance Guide
• SPARC Enterprise M3000 Server Getting Started Guide (This document)
• SPARC Enterprise M3000 Server Installation Guide
• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide
• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User ’s Guide

SPARC Enterprise M3000

Server

Getting Star ted Guide

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Note –; Installation Steps for SPARC Enterprise M3000 Server; SPARC; Prepare items required for installing the server.; See the; Caution –; Connect the power cords to the power supply system.; SPARC Enterprise M3000 Server Installation Guide; Administration

2 Note – AC power supply model and DC power supply model are available for the M3000 server. The chapters of each document are written based on AC power supply model. If there is any specific information on DC power supply model, it is indicated in the appendix “DC Power Supply Model“ of each docume...

Page 3 - Rear Panel of the Server; connect the administration console to the serial port (see; Be careful not to connect a LAN cable to the serial port.; Power supply unit; AC Power Supply Model

3 FIGURE 1 Rear Panel of the Server 7. Use the RS232C cable (serial cable, RJ-45 to DB-9) supplied with the server in the Accessory Kit, and connect the administration console to the serial port (see FIGURE 1 , #3) on the rear panel of the server. You can use any of the following devices with a DB-9...

Page 4 - a. Set the mode switch on the operator panel to the Service mode (; The key for the mode switch is supplied with the server.; Operator Panel; c. After the XSCF initialization completes, enter; A login authentication timeout will occur after one minute.; POWER LED; default; Leave it in that position for at least 5 seconds.

4 8. The following steps will log in to the XSCF Shell and initialize the XSCF settings. XSCF is a system control facility to set up and control the server. To initialize the XSCF settings, use the XSCF default user account. a. Set the mode switch on the operator panel to the Service mode ( ). The k...

Other Fujitsu Models

All Fujitsu Other