Page 2 - LIMITED WARRANTY AND LIMITATION OF LIABILITY
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for two years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal co...
Page 3 - Table of Contents; Title
i Table of Contents Title Page Introduction ................................................................................................................. 1 How to Contact Fluke ................................................................................................. 1 Safety Information ...
Page 4 - Users Manual; ii
Page 5 - Introduction; Warning; How to Contact Fluke; To contact Fluke, call one of the following telephone numbers:
1 Introduction The Fluke 323/324/325 Clamp Meter (the Product) measures ac and dc voltage, ac current, resistance, and continuity. The 324 and 325 can also measure capacitance and contact temperature. The 325 can also measure dc current and frequency. Note that the 325 is shown in all of the illustr...
Page 6 - To register your product, visit; Safety Information
323/324/325 Users Manual 2 • Japan: +81-03-6714-3114 • Singapore: +65-6799-5566 • Anywhere in the world: +1-425-446-5500 Or, visit Fluke's website at www.fluke.com . To register your product, visit http://register.fluke.com . To see, print, or download the latest manual supplement, visit http://us.f...
Page 8 - Keep fingers behind the finger guards on the probes.
323/324/325 Users Manual 4 • Do not apply more than the rated voltage, between the terminals or between each terminal and earth ground. • Comply with local and national safety codes. Use personal protective equipment (approved rubber gloves, face protection, and flame-resistant clothes) to prevent s...
Page 9 - Do not use the Product if it is damaged.
Clamp Meter Safety Information 5 • Connect the common test lead before the live test lead and remove the live test lead before the common test lead. • Remove all probes, test leads, and accessories before the battery door is opened. • Do not use the Product if it is damaged. • Disable the Product if...
Page 10 - Caution
323/324/325 Users Manual 6 • Remove batteries to prevent battery leakage and damage to the Product if it is not used for an extended period. • Remove batteries to prevent battery leakage and damage to the Product if is to be stored above its operating temperature. • Do not use a current measurement ...
Page 11 - Symbols; Symbol Meaning Symbol; Earth
Clamp Meter Symbols 7 Symbols Table 1. Symbols Symbol Meaning Symbol Meaning AC (Alternating Current) Earth DC (Direct Current) AC and DC Current Conforms to European Union directives. WARNING. RISK OF DANGER. Battery Consult user documentation. Double insulated WARNING. HAZARDOU...
Page 12 - Symbol Meaning Symbol
323/324/325 Users Manual 8 Table 1. Symbols (cont.) Symbol Meaning Symbol Meaning Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation. MEASUREMENT CATEGORY III is a...
Page 13 - Note; How to Clean the Product; Regularly wipe the case with a damp cloth and weak detergent.
Clamp Meter How to Clean the Product 9 Note The Measurement Category (CAT) and voltage rating of combinations of test probes, test probe accessories, current clamp accessories, and the Product is the LOWEST rating of individual components. How to Clean the Product Regularly wipe the case with a damp...
Page 14 - Specifications; Range
323/324/325 Users Manual 10 Specifications Maximum voltage between any Terminal and Earth Ground .............. 600 V Range 323 .................................................... 400.0 A 324, 325 ............................................ (40.00, 400.0) A Batteries .................................
Page 15 - Weight
Clamp Meter Specifications 11 Weight 323 ..................................................... 265 g 324 ..................................................... 208 g 325 ..................................................... 283 g Safety ...................................................... IEC 61010...
Page 16 - C or below 18
323/324/325 Users Manual 12 Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment) Class A: Equipment meets requirements for industrial electromagnetic wav...
Page 17 - digits
Clamp Meter Specifications 13 DC Current with Jaw (325) Range ..................................................... (40.00, 400.0) A Resolution ............................................... (0.01, 0.1) A Accuracy ................................................. 2.0 % ± 5 digits AC Voltage Range ....
Page 18 - Continuity Beeper
323/324/325 Users Manual 14 Continuity Beeper 323 .................................................... ≤ 70 Ω 324/325 ............................................. ≤ 30 Ω Capacitance (324, 325) Range...................................................... (100.0, 1000) μ F Resolution ....................
Page 19 - The Meter
Clamp Meter The Meter 15 The Meter 1 2 30 0 V CA T 60 0 V CA T 30 0 V CA T 60 0 V CA T 325 TR UE RMS CLAMP METER gtq008.eps
Page 20 - ON
323/324/325 Users Manual 16 20 OFF ON V Hz AC DC A k MAXMIN F F C ON 323 324/325 gtq001.eps
Page 25 - HOLD
Clamp Meter The Meter 21 HOLD 20 V 30 V > 30 0 V CAT 60 0 V CAT 325 TRUE RMS CLAMP METER AC/DC & ZERO AC/DC ZERO AC/DC ZERO AC/DC ZERO 2 sec gtq006.eps
Page 27 - AAA
