Fluke 115 - Manual
Fluke 115 Multimeter – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Information; XW; Warnings and Precautions; Do not use the Meter around explosive gas or vapor.
- Page 3 – International Electrical Symbols; Table 1. Electrical Symbols; Fuse; Specifications
- Page 4 – Accuracy Specifications
- Page 5 – Input Characteristics; Basic Maintenance; Set the rotary switch to
- Page 6 – OK; Figure 1. Fuse Testing; Replacing the Battery and Fuse; Warning; Figure 2. Battery and Fuse Replacement
- Page 7 – Remove the Meter from its holster.; Performance Tests; Required Equipment; Table 2. Required Equipment; DC Volts
- Page 8 – Double Banana plug; Testing the Display; Figure 3. Display Segments; Backlight Test; Off; Preparing for the Performance Tests; To avoid possible electric shock or personal injury:
- Page 9 – Warm up the calibrator as required by its specifications.; Table 3. DMM Performance Tests
- Page 11 – Display Reading; Lo; Testing the VoltAlert Function (117 only)
- Page 12 – Center Meter top on Hi terminal.; Figure 4. VoltAlert Testing; Calibration Adjustment; ZCAL; Calibration Adjustment Password; OFF; ZCAL
- Page 13 – Restoring the Default Password; Short S7 to reset to Default password; Figure 5. Calibration Password Reset
- Page 15 – Notes
- Page 17 – Replacement Parts; Table 5 lists the Meter’s replacable parts identified in Figure 6.; Figure 6. Exploded View of Meter
- Page 19 – Table 5. Replaceable Parts List; MANUAL,116C USERS MANUAL; Warranty
®
September 2006
©2006 Fluke Corporation. All rights reserved.
1
114, 115, 116, and 117
Digital Multimeters
Calibration Information
Introduction
XW
Warning
To avoid electric shock or injury, do not perform the performance tests or
calibration adjustment procedures unless qualified to do so.
The information provided in this document is for the use of qualified personnel
only.
The
114, 115, 116, & 117 Calibration Information
provides the information necessary to adjust and verify the
performance of the Fluke Models 114, 115, 115C, 116, 116C, 117, and 117C True RMS Multimeters (hereafter
known as the Meter). When specific models are noted in this manual, the “C” version is also included. For example,
when the listed model is 115, the instructions are applicable to the 115C as well.
The following information is included in this document:
•
Safety Information and International Electrical Symbols (page 2)
•
Specifications (page 3)
•
Testing the Fuse (page 5)
•
Replacing the Fuse and the Battery (page 6)
•
Cleaning (page 7)
•
Performance Tests (page 7)
•
Calibration Adjustment (page 12)
•
Replacement Parts and Accessories (page 17)
•
Complete Warranty (page 19)
See the
114, 115, 117 Users Manual
or the
115C, 117C Users Manual
or the
116 Users Manuals
or the
116C Users
Manual
for complete operating instructions.
Service Information
To contact Fluke, call one of the following telephone numbers:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's Web site at
www.fluke.com
.
To register your product, visit
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
114, 115, 116, and 117 Calibration Information 2 Safety Information "Warning" and "Caution" Statements A “ XW Warning" identifies hazardous conditions and actions that could cause bodily harm or death. A " W Caution" identifies conditions and actions that could damage the...
Digital Multimeters International Electrical Symbols 3 International Electrical Symbols Table 1 lists the international symbols that appear in this document and on the Meter. Table 1. Electrical Symbols Symbol Description Symbol Description B AC (Alternating Current) I Fuse F DC (Direct Current) T D...
114, 115, 116, and 117 Calibration Information 4 Accuracy Specifications Function Range Resolution Accuracy ± ([% of Reading] + [Counts]) Model [1] DC millivolts 600.0 mV 0.1 mV 0.5 % + 2 114, 115, 116, 117 DC Volts 6.000 V 60.00 V 600.0 V 0.001 V 0.01 V 0.1 V 0.5 % + 2 114, 115, 116, 117 DC, 45 to ...
