Fluke 50D - Manual
Fluke 50D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – International Symbols; Precautions and Safety Information; Safety Information; Caution
- Page 3 – Specifications; General; Basic Maintenance; Cleaning the Thermometer
- Page 4 – Disassembly/Reassembly
- Page 5 – Changing the Battery; Warning; Replace the battery as soon as the low battery indicator (
- Page 6 – Required Test Equipment; Performance Tests; Allow the thermometer to stabilize to room temperature, 23; Display Test; Note
- Page 7 – MAX; Wide Range Performance Test Procedure; Ice Bath Construction
- Page 8 – Ice Bath Test
- Page 9 – Calibration; Allow the thermometer to stabilize at room temperature, 23
- Page 11 – Thermocouple Input Calibration (Optional)
- Page 13 – Replaceable Parts
PN 1281009
October 1999 Rev.1, 3/03
©1999-2003 Fluke Corporation. All rights reserved. Printed in U.S.A.
All product names are trademarks of their respective companies.
1
50S & 50D
Thermometer
Calibration Information
W
Warning
These service instructions are for use by qualified personnel only. To avoid
electric shock, do not perform any servicing unless you are qualified to do so.
Introduction
This document contains specifications, general maintenance information, performance tests, calibration
procedures, and a list of user replaceable parts for the Fluke 50S and 50D Thermometers, hereafter referred
to as “the thermometer”.
Service
To contact Fluke, order parts, or locate a Fluke service center, call one of the following telephone numbers:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Warranty
This Fluke product will be free from defects in material and workmanship for one year from the date of
purchase. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse
or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty
on Fluke’s behalf. To obtain service during the warranty period, send your defective tester to the nearest
Fluke Authorized Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING
FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation
of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to
you.
Fluke Corporation
P.O. Box 9090
Everett WA
98206-9090
Fluke Europe B.V.
P.O. Box 1186
5602 B.D.
Eindhoven
The Netherlands
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
50S & 50D Thermometer Calibration Information 2 International Symbols Table 1 identifies the international electrical symbols used in this document. Table 1. International Electrical Symbols Used in this Document N Low Battery Important information Complies with relevant CanadianStandards Associ...
Specifications 3 Specifications General Weight 280 g (10 oz) Dimensions(without holster) 2.8 cm × 7.5 cm × 16.6 cm (1.1 in × 3 in × 6.6 in) Battery Standard 9 V battery (NEDA 1604, 6F22, or 006P) Protection Class III as defined in IEC 348, Safety Requirements for Electronic Apparatus Environmental O...
50S & 50D Thermometer Calibration Information 4 Clean the thermometer case with a mild detergent and water. The pca may be washed with isopropyl alcohol or deionozed water and a soft brush. Dry the pca with cleandry air at low pressure, then bake it at 50 o C for 24 hours. Disassembly/Reassembly...
