Fluke 65 - Manual
Fluke 65 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Information; Warning; To avoid possible personal injury:
- Page 3 – Specifications
- Page 4 – Maintenance; Match the; The
- Page 5 – Required Equipment; Setting Up for Performance Tests and Calibration; Caution
- Page 6 – Calibration Adjustments
- Page 8 – Replacement Parts
®
PN 1554518
January 2000
©2000 Fluke Corporation. All rights reserved. Printed in U.S.A.
1
Model 65
Infrared Thermometer
Calibration Information
Introduction
This calibration information for the Fluke 65 Infrared Thermometer (also referred to as “the UUT”) provides
the following information:
•
Safety information
•
Specifications
•
Basic maintenance
•
Equipment required for performance tests and calibration
•
Performance test procedures
•
Calibration adjustment procedures
•
List of replaceable parts
For complete operating instructions, refer to the Model 65 Infrared Thermometer Instruction Sheet.
Contacting Fluke
To locate an authorized service center, visit us on the World Wide Web at www.fluke.com. Or, call Fluke as
follows:
•
USA: 1-888-99-FLUKE (1-888-993-5853)
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31 402-678-200
•
Japan: +81-3-3434-0181
•
Singapore: +65-738-5655
•
Anywhere in the world: +1-425-446-5500
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model 65 Calibration Information 2 Safety Information A Warning To avoid possible personal injury: • The information provided in this manual is for the use of qualified personnel only. Do not perform the verification tests or calibration proceduresdescribed in this manual unless you are qualified to...
Specifications 3 Specifications Measurement Range − 40 °C to + 500 °C ( − 40 °F to + 932 °F) Operating Temperature (Ambient) 0 °C to + 50 °C ( + 32 °F to + 122 °F) Storage Temperature − 20 °C to + 70 °C ( − 4 °F to + 158 °F), without battery Display Resolution Below 200 °: 0.1° Above 200 °: 1° Measu...
Model 65 Calibration Information 4 Maintenance Installing the Batteries Remove the holster to access the battery door. Figure 1 shows how to replace the batteries. Caution • Match the + and − polarities of the battery with the battery case. • Do not attempt to recharge the batteries. • Do not throw ...
