Extech MO265 - Manual
Extech MO265 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Description; Meter Description
- Page 4 – Operation; Electrode Pins
- Page 5 – Pinless Measurements; Remote Probe Pin Measurements; cannot; Pinless
- Page 6 – Calibration Zero for Pinless Mode; Calibration Check for Pin Mode
- Page 7 – Meter Setup; OPTIONS SETTINGS SET-UP
- Page 8 – Battery Replacement; EU Battery ordinance; Maintenance; Copyright
User Guide
Dual Moisture Meter Pro
Pin / Pinless Moisture Meter with remote probe
Model MO265
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
MO265-EU-EN-V1.0-10/10 3 Description Meter Description 1. Electrode pins protective cap (pins underneath) 2. LCD display 3. Tri-color Bargraph 4. HOLD / POWER key 5. Protective cap attachment 6. Protective cap holders 7. MODE button 8. Remote probe connector plug 9. Remote Probe 10. Measurement pins...
MO265-EU-EN-V1.0-10/10 4 Operation Electrode Pins The electrode pins are replaceable. To insert or replace the pins refer to the illustration and instructions below. Replacement pins are stored in the battery compartment at the rear of the meter. a) Remove the protective cap at the top of the meter ...
MO265-EU-EN-V1.0-10/10 5 Pinless Measurements 1. Ensure that the protective cap is attached to the meter covering the pins. 2. Press the key to turn the meter ON. 3. Press the MODE key to select the Relative (REL) mode of operation. 4. The pinless moisture detector is located at the rear of the inst...
