Extech SDL 100 - Manual
Extech SDL 100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – International Safety Symbols; Meter Description
- Page 3 – Selecting pH or ORP modes of operation
- Page 4 – Data Hold
- Page 5 – Setup Mode
- Page 7 – System Reset; pH Calibration procedure; pH Calibration Considerations
- Page 8 – Clearing pH Calibration data; Datalogging and PC Interface; Types of Data Recording
- Page 9 – Automatic Datalogging; SD Data Card to PC Data Transfer
- Page 10 – AC Power Adaptor; Battery Replacement and Disposal
- Page 11 – Specifications; General Specifications; Copyright
USER GUIDE
pH/ORP Meter
SD Card real-time Datalogger
Model SDL100
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SDL100-EU-EN V1.4 7/13 Introduction Congratulations on your purchase of the Extech SDL100 pH/ORP Meter, an SD Logger Series meter. This meter displays and stores pH (from 0 to 14.00pH) and ORP (±1999mV) readings. A temperature probe (supplied) can be inserted to the meter to provide automatic temp...
3 SDL100-EU-EN V1.4 7/13 Getting Started Power ON-OFF Press and hold the power button for at least 1.5 seconds to power ON the meter. Press and hold the power button for 1.5 seconds to power OFF the meter. This meter is powered by six (6) 1.5VDC ‘AA’ batteries or by optional AC adaptor. If the...
4 SDL100-EU-EN V1.4 7/13 Manual / Automatic Temperature Compensation (for pH measurements only) Ph measurements are most accurate when the temperature of the solution under test is known and a temperature compensation factor is applied to the measurement. This is achieved using Manual or Automatic T...
