Extech PRC30 - Manual - manualsarea.com

Page 2 - International Safety Symbols; Cautions

2 PRC30-en-EU_V1.3 7/14 Introduction Thank you for selecting the Extech Model PRC30. This device is shipped fully tested and calibrated and, with proper use, will provide years of reliable service. Please visit the Extech Instruments website (www.extech.com) to check for the latest version of this U...

Page 3 - Meter Description; Display Layout

3 PRC30-en-EU_V1.3 7/14 Meter Description 1. AC adaptor input jack 2. Display 3. Power ON/OFF 4. Source output adjustment arrow buttons 5. Set button 6. Unit button (thermocouple type, °F or °C) 7. I/O button 8. MEM (memory STEP button) 9. Backlight/ZERO button 10. Input/Output jacks and Thermocoupl...

Page 4 - Keypad Descriptions and Operation

4 PRC30-en-EU_V1.3 7/14 Keypad Descriptions and Operation POWER BUTTON and AUTO POWER OFF FEATURE 1. Use the POWER button to turn the unit ON or OFF. When the unit is powered up, a short self-test will ensue after which the display will stabilize. 2. When the battery symbol flashes on the display, r...

Page 6 - STORING VALUES INTO MEMORY

6 PRC30-en-EU_V1.3 7/14 STORING VALUES INTO MEMORY There are 5 memory locations for each function. The default values stored in the locations are: Memory Location Type J, K, C, R, S, N Type T Type E T/C mV M1 0.0 o C (32.0 o F) 0.0 o C (32.0 o F) 0.0 o C (32.0 o F) 0mV M2 100.0 o C (212.0 o F) 100.0...

Page 7 - Modes of Operation; Temperature

7 PRC30-en-EU_V1.3 7/14 Modes of Operation Temperature MEASURE (Input) Mode of Operation 1. Turn the meter ON. 2. “MEASURE” will appear in the display. 3. Press and Hold the MODE button for 1 second to select the temperature function. 4. Press and Hold the TYPE button to select the thermocouple type...

Page 8 - Current and Voltage; arrow

8 PRC30-en-EU_V1.3 7/14 Current and Voltage MEASURE (Input) Mode of Operation In this mode, the unit will measure up to 50mADC or 20VDC 1. Turn the meter ON. 2. “MEASURE” will appear in the display. 3. Press and hold the MODE button for 1 second to select mA, mA with loop power or mV 4. Connect the ...

Page 9 - Battery Replacement; Battery Safety Reminders

9 PRC30-en-EU_V1.3 7/14 Tilt Stand / Hanger The rear stand is provides two methods for convenience in viewing. 1. Pull the bottom portion of the stand out to place the unit on a flat surface for viewing. 2. Pull the bottom and top portions of the stand out, and then rotate the stand to allow the uni...

Page 10 - Specifications

10 PRC30-en-EU_V1.3 7/14 Specifications Display Dot matrix LCD Cold junction compensation 0.03°C per °C (0.02°F per °F) Thermocouple Standard and Scale NIST 175, ITS-90 Current output capability 24mADC at 1000 ohms Voltage input impedance 10kohms minimum Meter Power 6 AA batteries or AC adaptor Auto...

Extech PRC30 - Manual

Table of Contents:

Summary

Other Extech Models