Extech MO230 - Manual
Extech MO230 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Meter Description; BUILD
- Page 3 – Operation; Getting Started; Replace the protective cap when finished.; CAUTION
- Page 5 – Programming Menu; Material Temperature Offset; C or; Maintenance; Always keep the instrument dry; Electrode Pin Replacement; To replace the two electrode pins:
- Page 6 – Battery Installation and Replacement; Remove the Phillips head screw at the rear of the instrument and; EU Battery ordinance; ) to return all used; disposal in the household garbage is prohibited!; You can hand over your
- Page 7 – Specifications; Function Range; Copyright; ISO
- Page 8 – Appendices; Wood Groups
User Guide
Moisture Meter
Model MO230
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
MO230-en-GB_v3.3 2/15 2 Introduction Congratulations on your purchase of the Extech MO230 Moisture Meter. The MO230 detects moisture in wood and building materials such as wall board, sheet rock, cardboard, paper, mortar, and plaster. Additionally, the meter measures Relative Humidity (RH) and Tempe...
MO230-en-GB_v3.3 2/15 3 Operation Getting Started 1. Remove the protective cap to expose the electrode measurement pins. 2. Press and hold the power button for 2 seconds to switch the meter ON. The ambient temperature will display and then the display will switch to the moisture measurement mode. No...
MO230-en-GB_v3.3 2/15 5 Programming Menu The programming menu offers five configurable parameters. To access the menu, turn the meter on, then momentarily press and release the SET and CLEAR buttons at the same time. Once in the programming menu, use the MODE button to step through the parameters an...
