Extech 380926 - Manual
Extech 380926 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Symbols; Safety Precautions
- Page 3 – METER DESCRIPTION; Front panel; REL; Units
- Page 4 – OPERATING INSTRUCTIONS; Current Measurements using the Clamp, DC/AC; INCORRECT; CORRECT; μA and mA
- Page 6 – FORWARD TEST
- Page 7 – MAINTENANCE
- Page 8 – SPECIFICATIONS
- Page 10 – Product specifications subject to change without notice; Warranty; EXTECH INSTRUMENTS CORPORATION; one year; Calibration and Repair Services
User's Manual
2000A Auto Ranging
True RMS Clamp + DMM
MODEL 380926
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
380926 -EN-V7.1-3/12 2 INTRODUCTION Congratulations on your purchase of Extech’s 380926 Clamp meter + Digital MultiMeter. This meter can measure to 2000A through the clamp and also measure to 400mA through the test leads. With Capacitance, Diode and Duty Cycle measurements, this meter provides the u...
380926 -EN-V7.1-3/12 3 METER DESCRIPTION Front panel 1. Current Sense Jaws 2. Function switch 3. Keypad 4. LCD display 5. Input jacks Note: The tilt stand and battery compartment door are located on the rear of the meter. Symbols AC current or Voltage DC current or Voltage Continuity H Display hold ...
380926 -EN-V7.1-3/12 4 OPERATING INSTRUCTIONS Current Measurements using the Clamp, DC/AC WARNING: Make sure that the test leads are disconnected from the meter’s terminals before making current measurements with the clamp jaw. WARNING: For safety, use the rubber input terminal cover when measuring ...
