Extech 380396 - Manual
Extech 380396 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Safety; International Safety Symbols; Danger; Safety Notes
- Page 4 – Cautions; Safety Category Information
- Page 6 – Insulation Resistance Testing; made even if; DANGER; PRESS TO TEST Knob; All insulation resistance tests are initiated with the; Emergency Stop; To stop a test at any time, press the; STOP; button or rotate the; PRESS TO TEST
- Page 7 – Insulation Resistance Test; Manual Test; icon will; Locked Test; icon will flash
- Page 8 – Timed Insulation Test; the device and the results will; Polarization Index; = Resistance after 10 minutes / Resistance after 1 minute
- Page 9 – Dielectric Absorption Ratio; = Resistance after 1 minute / Resistance after 30 seconds; Insulation Resistance Measurement Considerations; measuring the subsequent current flow.
- Page 10 – Use of the Guard Terminal; . In order to prevent
- Page 11 – Press the backlight button to switch on the LCD display backlight.; Auto Power Off; Disconnect the test leads from the unit.; Press the BATT button. The “
- Page 12 – AC/DC Voltage and Resistance Testing; AC/DC Voltage Measurements
- Page 14 – Maintenance; Battery Replacement; WARNING; Power Adaptor
- Page 15 – Cleaning and Care; only
- Page 16 – Specifications; General Specifications
- Page 17 – Insulation Resistance Measurement Specifications; Test Voltages; AC/DC Voltage Specifications; Low Resistance Measurement and Continuity Specifications; Range Resolution; Continuity Buzzer; Copyright; ISO
User's Guide
Digital High Voltage Insulation Tester
Model 380395 or 380396
MAX
MIN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
380395_380396-en-EU_V1.3 8/14 3 Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information. This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages may be present. Dang...
380395_380396-en-EU_V1.3 8/14 4 Cautions Improper use of this meter can cause damage, shock, injury or death. Read and understand this user manual before operating the meter. Always remove the test leads before replacing the batteries. Inspect the condition of the test leads and the meter itse...
380395_380396-en-EU_V1.3 8/14 6 Insulation Resistance Testing CAUTIONS: Ensure that no electrical charge exists on the circuit under test. Insulated gloves should be worn while testing. Use extreme caution to avoid touching the tips of the test leads or the circuit under test when the PRESS TO...
