Extech 365510 - Manual
Extech 365510 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
365510-EN v2.3 07/13
SPLIT/RESET MODE START/STOP
DISPLAY Alarm Bell
USER GUIDE
Model 365510
Digital Stopwatch
Introduction
Congratulations on your purchase of the Extech 365510 Digital Stopwatch with Split Time,
Two Competitor monitoring, Alarm and Clock features. The accuracy of the clock is ±3
seconds per 24 hours. Careful use of this stopwatch will provide years of reliable service.
Operation
NORMAL MODE
1.
In Normal Mode the Hours/Minutes/Seconds and the day of week is displayed.
2.
Press and hold the SPLIT/RESET button to view the Alarm Time.
3.
To turn the Alarm ON or OFF, press the START/STOP button while holding down
the SPLIT/RESET button (the bell icon in the upper right-hand corner of the
display is on when the Alarm is turned ON).
4.
Press and hold START/STOP to view the calendar month and date.
STOP WATCH MODE
(To access, press the MODE button once from Normal Mode)
When the Stopwatch Mode is first accessed, the SU-FR-SA icons will flash.
A. Elapsed Timer
1. Press Start/Stop to Start (SU-SA icons flash)
2. Press Start/Stop to Stop (SU-FR-SA icons flash)
3. Press Start/Stop Restart
4. Press Start/Stop to Stop
5. Press Split/Reset to reset the display. Press MODE to return to Normal Mode.
B. Split Time
1. Press Start/Stop to Start (SU-SA icons flash)
2. Press Split/Reset to Split (SU-TH-SA icons flash)
3. Press Split/Reset to release Split (SU-SA icons flash)
4. Press Start/Stop to Stop (SU-FR-SA icons flash)
5. Press Split/Reset to reset the display. Press MODE to return to Normal Mode.
C. Two Competitor Timer
1. Press Start/Stop to Start (SU-SA icons flash)
2. Press Split/Reset to Split (SU-TH-SA icons flash)
3. Press Start/Stop to Stop (SU-TH-FR-SA icons flash)
4. Press Split/Reset to release Split (SU-FR-SA icons flash)
5. Press Split/Reset to reset the display. Press MODE to return to Normal Mode.
NOTE: Press all three buttons simultaneously to reset to the Elapsed Timer mode.
SETTTING DATE AND TIME
(To access, press MODE button 3 times from Normal Mode)
Press SPLIT/RESET to scroll through the programmable digits fields. The flashing digit
is the digit that is ready to be edited. Use the START/STOP button to edit the flashing
digit. When setting the hours, minutes, and seconds you can press START/STOP to
reset the selected digit to zero; press and hold it down to quickly scroll. The hour digits
will scroll through A (for AM), P (for PM) and H (for 24 hour clock). Press MODE to
return to normal operation.
ALARM SET
(To access, press MODE twice from the Normal Mode)
1. Once ALARM SET mode is accessed the hour indicator and MO icon will flash.
2. Press STOP/START to change the hour. This step also activates the alarm and displays the
alarm indicator icon (bell in upper right-hand corner of LCD display).
3. Press SPLIT/RESET to select minutes.
4. Press STOP/START to advance the minutes.
5. Press MODE to save alarm setting and to return to time display.
6. To enable the Alarm, follow the instructions in step 3 of the Normal Mode section. Note that
the Alarm time setting will reflect the AM, PM, or H mode programmed above in the
SETTING DATE AND TIME section.
ALARM SNOOZE and ALARM SILENCE
When the alarm sounds, press START/STOP. A 5-minute snooze period will begin. To
silence the alarm without snooze, press SPLIT/RESET after the alarm sounds.
HOUR CHIME
(stop watch beeps once every hour on the hour)
To set the Hour Chime ON, press and hold SPLIT/RESET then press MODE (while
continuing to hold SPLIT/RESET) until the days of the week appear on the top of the
LCD. To turn Hour Chime OFF press MODE (while continuing to hold the SPLIT/RESET
button) until the days of the week switch OFF.
Battery Replacement
This Stopwatch uses an LR-44 or A-76 alkaline button battery. The Phillips head screws on
the rear of the watch must be removed to open the watch and access the battery. It is
recommended that a qualified technician replace battery. Battery life is typically one year.
Calibration Services
Extech offers repair and calibration services for the products we sell. Extech also provides NIST
certification for most products. Call the Customer Service Department for information on
calibration services available for this product. Extech recommends that annual calibrations be
performed to verify meter performance and accuracy.
Warranty
FLIR
Systems,
Inc.
warrants
this
Extech
Instruments
brand
device
to
be
free
of
defects
in
parts
and
workmanship
for
one
year
from
date
of
shipment
(a
six
month
limited
warranty
applies
to
sensors
and
cables).
If
it
should
become
necessary
to
return
the
instrument
for
service
during
or
beyond
the
warranty
period,
contact
the
Customer
Service
Department
for
authorization.
Visit
the
website
www.extech.com
for
contact
information.
A
Return
Authorization
(RA)
number
must
be
issued
before
any
product
is
returned.
The
sender
is
responsible
for
shipping
charges,
freight,
insurance
and
proper
packaging
to
prevent
damage
in
transit.
This
warranty
does
not
apply
to
defects
resulting
from
action
of
the
user
such
as
misuse,
improper
wiring,
operation
outside
of
specification,
improper
maintenance
or
repair,
or
unauthorized
modification.
FLIR
Systems,
Inc.
specifically
disclaims
any
implied
warranties
or
merchantability
or
fitness
for
a
specific
purpose
and
will
not
be
liable
for
any
direct,
indirect,
incidental
or
consequential
damages.
FLIR’s
total
liability
is
limited
to
repair
or
replacement
of
the
product.
The
warranty
set
forth
above
is
inclusive
and
no
other
warranty,
whether
written
or
oral,
is
expressed
or
implied.
Copyright
©
2013
FLIR
Systems,
Inc.
All
rights
reserved
including
the
right
of
reproduction
in
whole
or
in
part
in
any
form
www.extech.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
