Page 3 - WARNING; ENVIRONMENT; Disposal
3 G2 REPORTER OWNER’S MANUAL NEED HELP? Contact Us. Etón Corporation, 1015 Corporation Way, Palo Alto, CA 94303, USA. 1-800-872-2228 (U.S.); 1-800-637-1648 (Canada); 650-903-3866 (worldwide); M-F, 8:00-4:30, Pacific Standard Time; www.etoncorp.com. WARNING Do not expose this appliance to rain or moi...
Page 4 - FUNCTION KEYS
G2 REPORTER OWNER’S MANUAL 4 FUNCTION KEYS G2 REPORTER AM • FM • SW • Radio/Recorder RADIO/MP3 ESC MENU ENTER 22 21 20 19 18 17 16 15 14 13 12 23 10 11 1 2 3 4 5 6 7 8 9 1 Power On/Off 2 Frequency Tuning: M – 3 Frequency Tuning: M + 4 Built–in MIC 5 Display 6 Radio/MP3 Mode Selection 7 Volume – 8 Vo...
Page 6 - BATTERY POWER SUPPLY
G2 REPORTER OWNER’S MANUAL 6 BATTERY POWER SUPPLY Before initial use, open the battery compartment (behind the back stand), make sure the lithium battery is installed. CHARGING THE LITHIUM BATTERY To charge the battery, connect the unit to the mini-USB port and opposite end to a power source (5V DC/...
Page 7 - MAIN MENU
7 G2 REPORTER OWNER’S MANUAL TURN ON/OFF THE UNIT 1. Turn ON/OFF manually: Press the < > button.2. Turn Off Using Automatic Sleep Timer: Select “Sleep Timer” in Sys Set mode, press the Tuning Knob to enter and then rotate the Tuning Knob to adjust the auto turn off timer from 0-90 minutes. 3. ...
Page 8 - FM RADIO; Choose Bands
G2 REPORTER OWNER’S MANUAL 8 FM RADIO In Main Menu, select FM Radio and press the Tuning Knob to listen to FM. FM Radio Press the < > button to enter either Radio or Music Mode. Choose Bands In Radio Mode, press the < > , < > or < > button to select your desired band. The the...
Page 9 - FM Stereo/Mono Selection; To activate stereo listening, press the <; Volume Adjustment
9 G2 REPORTER OWNER’S MANUAL FM Stereo/Mono Selection To activate stereo listening, press the < > button and the display will show < > symbol; press again to deactivate, and the mono symbol < > will show. Volume Adjustment Press the < > or < > button to adjust your desi...
Page 10 - TUNE IN STATIONS
G2 REPORTER OWNER’S MANUAL 10 TUNE IN STATIONS Turn on the radio and select FM Radio from < Main Menu > by rotating the Tuning Knob. Press the < Tuning Knob > to enter, then choose your desired band by pressing on either the FM, AM or SW button.Use either of the methods below to tune int...
Page 11 - Storing Stations Manually; Select your desired station, press the tuning knob or the <; Listening to Stored Memory; In radio mode, press the number on the keypad that corresponds; Delete Single/All Memories
11 G2 REPORTER OWNER’S MANUAL Storing Stations Manually Select your desired station, press the tuning knob or the < > button and rotate the Tuning Knob to select < Save >, then rotate the Tuning Knob or the < >, < > button to select memory location from 1~50 in FM/SW mode or ...
Page 12 - RECORD RADIO
G2 REPORTER OWNER’S MANUAL 12 RECORD RADIO While listen to the FM/AM/SW stations, you can directly record the programs by following the steps below:1. Adjust the volume level up to 102. Press the Tuning Knob and rotate it to select either of below recording formats: · 129k BPS (WAV format, max 68 ho...
Page 13 - LISTEN TO RECORDING FILES
13 G2 REPORTER OWNER’S MANUAL LISTEN TO RECORDING FILES 1. Select < Voice > in the < Main Menu > and press the Tuning Knob to enter. 2. Press the < > or < > button to select file. 3. Press the < > to play/pause the recorded file; press the < > button to stop. NOTE...
Page 14 - LISTEN TO MP3 FILES
G2 REPORTER OWNER’S MANUAL 14 LISTEN TO MP3 FILES 1. Turn on the unit and select < Music > from the < Main Menu >, then press the Tuning Knob to enter. 2. Rotate the Tuning Knob or press the < > or < > button to select a music file. You can also directly enter the No. of the ...
Page 15 - While not playing any music, press the Tuning Knob to enter; Listen to the music files in the SD card
15 G2 REPORTER OWNER’S MANUAL 5. While not playing any music, press the Tuning Knob to enter the following settings: · Local folder: Select music file · Delete file: Delete a single music file · Delete all: Delete all music files · Exit To operate above settings, press the Tuning Knob to enter or co...
Page 16 - equipment, and the other end into the Line-in Port of the unit.
G2 REPORTER OWNER’S MANUAL 16 USE AS AN ACTIVE LOUDSPEAKER (LINE-IN) Connecting the unit to other medias (MP3, voice recorder, etc.) with the Line-in Cable, can increase the sound of the media connected.1. Plug one end of the Line-in cable to the earphone jack of the audio equipment, and the other e...
Page 17 - Insert the external MIC into the external MIC Jack on the
17 G2 REPORTER OWNER’S MANUAL USE AS LOUDSPEAKER (MIC) 1. Insert the external MIC into the external MIC Jack on the left side of the unit. 2. Turn on the unit, select <Loudspeaker> in < Main Menu > by pressing the Tuning Knob. 3. Press the < > button and select < MIC Signal >...
Page 18 - to select LOUD SPEAKER.; TO PLAY LINE-IN RECORDING; Selection time for each step is about 5 seconds.
G2 REPORTER OWNER’S MANUAL 18 LINE-IN RECORDING 1. Press POWER button to turn on radio.2. Plug a line in source into the LINE-IN socket < >. 3. Press the MENU button < > and turn the tuning knob to select LOUD SPEAKER. 4. Press the tuning knob.5. Press and release the SET button < SET...
Page 19 - Time Set; Press the Tuning Knob to confirm time setting.; Date Set; the Tuning Knob or press the <; Calender Info
19 G2 REPORTER OWNER’S MANUAL Time Set 1. Select < Time Set > in Sys Set Mode by rotating the Tuning Knob.2. Press the Tuning Knob and notice the hour-indicator flashes, then rotate the Tuning Knob to adjust the hour; Press the Tuning Knob and notice the minute-indicator flashes, then rotate t...
Page 20 - Alarm Set; Press the Tuning Knob again to enter the alarm setting,
G2 REPORTER OWNER’S MANUAL 20 Alarm Set 1. Select [Alarm Set] in Sys Set mode and press the Tuning Knob, [New] appears on the display. 2. Press the Tuning Knob again to enter the alarm setting, [Normal Alarm/Power On/Power Off/Exit] appears. 3. Rotate the Tuning Knob to select Normal Alarm and press...
Page 22 - SLEEP TIMER; This mode can save more electricity.; BACKLGHT TIMER; Available languages:
G2 REPORTER OWNER’S MANUAL 22 SLEEP TIMER Select [Power Off] in Sys Set mode, press the Tuning Knob to enter, then rotate the Tuning Knob or press the < >, < > button to adjust the auto turn off timer from 0-90, select “0” to turn off the sleep timer.After setting the sleep timer, < &...
Page 23 - CONTRAST SETTING
23 G2 REPORTER OWNER’S MANUAL CONTRAST SETTING Select [Contrast] in Sys Set mode and press the Tuning Knob. The brightness level 0-16 appears on the display, rotate the Tuning Knob to adjust, and then press the Tuning Knob to confirm and exit. MEMORY INFO Select [Memory Info] in Sys Set mode and pre...
Page 24 - BACK STAND; Tuning Knob to enter below settings:
G2 REPORTER OWNER’S MANUAL 24 BACK STAND Open the stand on the rear of the unit to allow for an upright position. WORKING WITH EBOOK 1. Select <Ebook> in < Main Menu >, press the Tuning Knob to enter.2. Select your desired file by rotating the Tuning Knob, and press the Tuning Knob to en...
Page 25 - FM RDS; Select an FM station, press the Tuning Knob and rotate to select
25 G2 REPORTER OWNER’S MANUAL FM RDS 1. Select an FM station, press the Tuning Knob and rotate to select <Open RDS>, the symbol < > will show on the display. 2. Press the < > button to shift the transmitted details (display on the button of the screen). PTY: Program Type PS: Statio...
Page 26 - SPECIFICATIONS; Specifications for Radio
G2 REPORTER OWNER’S MANUAL 26 SPECIFICATIONS Frequency RangeFM 87.0 - 108.0MHz or 64 AM 522 - 1710 KHz SW 2.30 - 23.00 MHz 2. Preset Memories: FM 99 AM 50 SW 99 3. 4. Noise Limit SensitivityFM ≤ 5 V AM ≤ 2.5mv/m SW ≤ 50 V Signal Selection ≥ 40dB 1. 5. Memory 4GB 6. Record Format WAV/MP3 7. Max. Reco...
Page 27 - WARRANTY REGISTRATION; Etón Corporation; LIMITED WARRANTY
27 G2 REPORTER OWNER’S MANUAL WARRANTY REGISTRATION To ensure full warranty coverage or product updates, registration of your product should be completed as soon as possible after purchase or receipt. You may use one of the following options to register your product:1. By visiting our website at htt...
Page 28 - SERVICE FOR YOUR PRODUCT; WARRANTY –; If your product is still in warranty and the Etón
G2 REPORTER OWNER’S MANUAL 28 SERVICE FOR YOUR PRODUCT To obtain service for your product, we recommend first contacting an Etón service representative at 800-872-2228 US, 800-637-1648 Canada or (650) 903-3866 for problem determination and troubleshooting. If further service is required, the technic...
