Epson WorkForce 310 All-in-One Printer- Quick Guide

*411645900*

*411645900*

If anything is missing, contact Epson as described on the back.

Note:

The model name of your product may vary slightly from the one shown above.

The included CD and documentation apply to all products in the series.

Caution:

Do not open ink cartridge packages until you are ready to install the ink.

Cartridges are vacuum packed to maintain reliability.

Canada only:

For French speakers, remove sticker(s) from the backing sheet and

place over corresponding text on the control panel.

Remove all protective materials.

Unpack

1

Start Here

Make settings

3

Auto Answer/

Space

Redial/Pause

Stop/

Clear Settings

B

&

W

Color

Speed Dial

Group Dial/

Backspace

1

Select your language.

Press

or

to select the desired option.

Press

OK

when done.

2

Press

or

to select your country/region, then

press

OK

.

3

For the Daylight Saving Time setting, press

or

to select

Summer

if your region uses

Daylight Saving Time and it’s currently in effect.
(DST is effective from spring through summer.)
Otherwise, select

Winter

to turn off the setting.

Press

OK

.

4

Press

or

to select the date format, then

press

OK

.

5

Use the numeric keypad to set the date, then press

OK

.

6

Press

or

to select the time format, then

press

OK

.

7

Use the numeric keypad to set the time.

8

If you selected

12h

as the time format,

press

or

to select

AM

or

PM

.

9

Press

OK

when done.

Note:

You can change the date and time settings by pressing the

Copy

button,

pressing the

Menu

button, selecting

Maintenance

, then selecting

Date/Time

.

1

Open the paper support and pull up the extensions.

2

Pull out the output tray extensions, and raise the stopper.

Note:

If you are using legal-size paper, do not raise the stopper.

3

Squeeze the edge guide and slide it left.

Tip:

If the feeder guard is in the way, flip it forward.

4

Load paper against the right edge and behind the tab, with the printable
side face up.

Note:

Don’t load the paper sideways; always load it

short edge first.

5

Slide the edge guide over.

5

Load paper

3

Remove only the yellow tape from each cartridge.

Caution:

Don’t remove any other seals or the cartridges may leak.

4

Insert the cartridges in the holder for each color.

5

Press each cartridge down until it clicks.

6

Close the ink cartridge cover. Press it down until it clicks.

7

Lower the scanner.

8

Press the

OK

button to charge the ink. Charging takes about

2

1

/

2

minutes.

Note:

Your WorkForce 310 Series ships with full cartridges and part of the ink

from the first cartridges is used for priming the WorkForce 310 Series.

Caution:

Don’t turn off the WorkForce 310 Series while the ink system is

charging or you’ll waste ink.

(Included for

Canada only)

1

Connect the power cable.

Caution:

Do not connect to your computer yet.

2

Press the

On

button.

Turn on

2

Series

Phone cord

Power cord

Install ink cartridges

4

Note:

Don’t load paper before installing the ink cartridges.

1

Lift up the scanner, then open the cartridge cover.

2

Shake the ink cartridges gently 4 or 5 times, then unpack them.