Epson WF-M1030- User Manual

Printer Parts - Inside 1 Printer cover 3 Ink cartridge holder (do not remove) 4 Print head (underneath the ink cartridge holder) Parent topic: Printer Parts Locations Printer Parts - Control Panel Buttons and Lights 1 The power button and power light 10

2 The WiFi light 3 The Wi-Fi button 4 The network status button 5 The cancel button 6 The paper light 7 The ink light Parent topic: Printer Parts Locations Related references Product Light Status The Power Off and Sleep Timers The product enters sleep mode or turns off automatically if it is not use...

4. Select the time period you want as the Power Off Timer setting. 5. Click Send . 6. Select the time period you want as the Sleep Timer setting. 7. Click Send . 8. Click OK to close the open program windows. Parent topic: The Power Off and Sleep Timers Changing the Power Off and Sleep Timer Setting...

3. Select the time period you want as the Power Off Timer setting. 4. Select the time period you want as the Sleep Timer setting. 5. Click Apply . 6. When you see the confirmation message, click Yes , then close the Printer Settings window. Parent topic: The Power Off and Sleep Timers 13

Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper for DocumentsLoading EnvelopesPaper Loading CapacityAvailable EPSON PapersPaper or Media Type Settings Loading Paper for Documents You can print documents on a variety of paper types and sizes. 1. Raise th...

Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Load letterhead or pre-printed paper top edge first. • Do not load paper above the arrow mark inside the edge guide. • Check the paper...

Always follow these loading guidelines: • If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time. • If print quality declines when printing multiple envelopes, try loading one envelope at a time. • Do not load envelopes that are cu...

Paper type Loading capacity Plain paper - Legal (8.5 × 14 inches 1 sheet [216 × 357 mm]) Epson Presentation Paper Matte - Legal (8.5 × 14inches [216 × 357 mm]) Epson Premium Presentation Paper Matte Epson Premium Presentation Paper Matte Double-sided Epson Ultra Premium Presentation Paper Matte Epso...

Paper Type Size Part number Sheet count Epson Premium Presentation 8 × 10 inches (203 × 254 mm) S041467 50 Paper Matte Letter (8.5 × 11 inches S041257 50 [216 × 279 mm]) S042180 100 Epson Premium Presentation Letter (8.5 × 11 inches S041568 50 Paper Matte Double-sided [216 × 279 mm]) Epson Presentat...

Printing From a Computer Before printing from your computer, make sure you have set up your product and installed its softwareas described on the Start Here sheet. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website. If...

Multi-Page Printing Options - Windows You can select any of the available options in the Multi-Page menu to set up your multi-page print job. 2-Up and 4-Up Prints 2 or 4 pages on one sheet of paper. Click the Page Order button to select page layout and border options. 2×1 Poster, 2×2 Poster, 3×3 Pos...

3. Select the double-sided printing options you want to use. 4. Click OK to return to the Main tab. 5. Print a test copy of your double-sided document to test the selected settings. 6. Follow any instructions displayed on the screen during printing. Note: The surface of the paper may smear during do...

Parent topic: Printing with Windows Double-sided Printing Options - Windows You can select any of the available options on the 2-Sided Printing Settings window to set up yourdouble-sided print job. Binding Edge Options Select a setting that orients double-sided print binding in the desired direction...

4. To add a header or footer to your document, select Header/Footer , then select Settings to customize the text and location. 5. Select any of the Additional Settings options to customize your print. Custom Tone Correction Options - WindowsImage Options and Additional Settings - WindowsHeader/Foote...

You can select to print the following information, which comes from the Windows Control Panel on yourcomputer: • User Name • Computer Name • Date • Date/Time Parent topic: Selecting Additional Layout and Print Options - Windows Selecting a Printing Preset - Windows For quick access to common groups ...

2. Place your cursor over one of the Printing Presets to view its list of settings. 3. Use any of the available options on the screen to control your printing presets. 4. To choose an option for printing, select it. 5. Click OK . Parent topic: Printing with Windows Printing Your Document - Windows O...

1. Click OK to save your settings. You see your application's Print window, such as this one: 2. Click OK or Print to start printing. Parent topic: Printing with Windows Selecting Default Print Settings - Windows When you change your print settings in a program, the changes apply only while you are ...

3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK . These settings are now the defaults selected for printing. You can still change them as needed forprinting in any program session. Changing the Language of the Printer Software Screens Parent topic: ...

You see the maintenance options: 4. Select the language you want to use as the Language setting. 5. Click OK to close the printer software window. The printer software screens appear in the language you selected the next time you access them. Parent topic: Selecting Default Print Settings - Windows ...

3. Do one of the following: • To change how often the software checks for updates, select a setting in the Check every menu. • To disable the automatic update feature, select the Never option. 4. Click OK to exit. Note: If you choose to disable the automatic update feature, you can check for updates...

Selecting Basic Print Settings - Mac OS X Select the basic settings for the document you want to print. 1. Open a document for printing. 2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. S...

7. Select any application-specific settings that appear on the screen, such as those shown in the imageabove for the Preview application. 8. Select Print Settings from the pop-up menu. You see these settings: 9. Select the type of paper you loaded as the Media Type setting. Note: The setting may not...

10. Select the Print Quality setting you want to use. Print Quality Options - Mac OS X Parent topic: Printing with Mac OS X Related references Paper or Media Type Settings Related tasks Selecting Page Setup Settings - Mac OS XPrinting Your Document - Mac OS X Print Quality Options - Mac OS X You can...

Note: If you do not see these settings in the print window, check for them in your application before printing. They may be accessible by selecting Page Setup from the File menu. 1. Select the size of the paper you loaded as the Paper Size setting. You can also select a custom setting to create a cu...

• To invert or flip the printed image, select the Reverse page orientation or Flip horizontally settings. Parent topic: Printing with Mac OS X Selecting Printing Preferences - Mac OS X You can select printing preferences that apply to all the print jobs you send to your product. 1. In the Apple menu...

Skip Blank Page Ensures that your product does not print pages that contain no text or images. Quiet Mode Lessens noise during printing when you select Plain Paper/Bright White Paper as the paper Type or Media Type setting. High Speed Printing Speeds up printing, but may reduce print quality. Warnin...

Checking Print Status - Mac OS X During printing, you can view the progress of your print job, control printing, and check ink cartridgestatus. 1. Click the printer icon when it appears in the Dock. You see the print status window: 2. Select the following options as necessary for your version of Mac...

Replacing the Ink Cartridge When the ink cartridge is expended, you need to replace it. You may also need to replace a cartridge that is more than six months old, if your printouts do not looktheir best, even after cleaning and aligning the print head. Note: Please dispose of your used Epson branded...

Checking Cartridge Status with Windows A low ink reminder appears if you try to print when ink is low, and you can check your cartridge status atany time using a utility on your Windows computer. 1. To check your cartridge status, double-click the product icon in the Windows taskbar, then click the ...

4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox. Parent topic: Check Cartridge Status Related tasks Removing and Installing the Ink Cartridge 47

Checking Cartridge Status with Mac OS X You can check your cartridge status using a utility on your Mac. 1. Do one of the following: • Mac OS X 10.6/10.7/10.8 : In the Apple menu or the Dock, select System Preferences . Select Print & Fax or Print & Scan , select your product, and select Opt...

3. Do the following as necessary: • To update the ink cartridge status, click Update . • Replace or reinstall the ink cartridge, if necessary. Note: If the cartridge is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge s...

10. Press the cancel button. The print head moves to its home position and the printer starts priming the ink. This takes about 2minutes. Caution: Never turn off the product while the power light is flashing or you will waste ink. If you remove a low or expended ink cartridge, you cannot re-install ...

2. Click the Ink Cartridge Replacement icon and follow the on-screen instructions to replace your ink cartridge. Parent topic: Replacing the Ink Cartridge Related concepts Purchase Epson Ink Cartridges 55

Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridge. Print Head MaintenanceCleaning the Paper Guide Related topics Replacing the Ink Ca...

1. Make sure no product lights are indicating errors. 2. Load a few sheets of plain paper in the product. 3. Turn off the product. 4. Hold down the cancel button as you press the power button to turn the product back on. Hold down both buttons until the power light begins to flash, then release the ...

Print head needs cleaning 6. If there are no gaps, the print head is clean and you can continue printing. If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check Related concepts Print Head Cleaning Checking the Nozzles Using a Computer Utility You can ...

6. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 7. If there are no gaps, click Finish . If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check 60

Related concepts Print Head Cleaning Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean theprint head. Note: You cannot clean the print head if the ink cartridge is expended, and may not be able to clean it when the cartridge is lo...

The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished. Caution: Never turn off the product during a cleaning cycle or you may damage it. 4. Run a nozzle check to confirm that the print head is clean. If you don’t see any improvement after cleaning the...

If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and waitat least 6 hours. Then try cleaning the print head again. If quality still does not improve, the ink cartridgemay be old or damaged and needs to be replaced. Parent topic: Print Head Cleaning R...

Cleaning the Paper Guide If you see ink on the back of a printout, you can clean the paper guide to remove any excess ink. 1. Make sure no product lights are indicating errors. 2. Load a few sheets of plain paper in the product. 3. Do one of the following: • Windows: Right-click the product icon in ...

Cleaning and Transporting the Product If your product gets dirty or you need to move it some distance, follow the instructions in these sections. Cleaning the ProductTransporting the Product Cleaning the Product To keep your product working at its best, you should clean it several times a year. Caut...

Solving Problems Check these sections for solutions to problems you may have using your product. Checking for Software UpdatesProduct Light StatusRunning a Product CheckSolving Setup ProblemsSolving Network ProblemsSolving Paper ProblemsSolving Problems Printing from a ComputerSolving Page Layout an...

Light status Condition/solution An unknown product error has occurred. Turn the product off. Make The power, paper, and sure no paper is jammed in the product, then turn the product back on ink lights are flashing fast again. If the error continues, contact Epson for support. An error has occurred d...

Solving Setup Problems Check these sections if you have problems while setting up your product. Noise After Ink InstallationSoftware Installation Problems Parent topic: Solving Problems Noise After Ink Installation If you hear noises from your product after installing ink, check the following: • The...

Related references Windows System RequirementsMac System Requirements Solving Network Problems Check these solutions if you have problems setting up or using your product on a network. Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not responsible for...

obtain your product's MAC address, print a network status sheet. Then follow the instructions in yourrouter or access point documentation to add the address to the list. • If your router or access point does not broadcast its network name (SSID), follow the instructions that came with your product t...

Product Does Not Appear in Mac OS X Printer Window If your product does not appear in the Mac OS X printer window, try these solutions: • Turn your product off, wait 30 seconds, then turn it back on again. • If you are connecting the product via Wi-Fi Protected Setup (WPS) and the WiFi light on your...

• Try connecting your product to a different port or a different router, access point, switch, or hub. • Try connecting with a different Ethernet cable. • Try printing to your product from another computer on the network. • If you are connecting the product via EpsonNet Setup and the WiFi light on y...

• For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the sheet feeder printable side up. • Follow any special loading instructions that came with the paper. Parent topic: Solving Paper Problems Re...

5. Close the cover. 6. Press the cancel button to resume printing. 7. Carefully follow all paper loading instructions when you load new paper. Parent topic: Solving Paper Problems Related topics Loading Paper Paper Ejection Problems If you have problems with paper ejecting properly, try these soluti...

Related tasks Cancelling Printing Using a Product Button Related topics Loading Paper Solving Problems Printing from a Computer Check these sections if you have problems while printing from your computer. Nothing PrintsNoise Occurs, But Nothing PrintsNoise When Product Sits for a WhileProduct Icon D...

• Windows Vista : Click and select Control Panel . Click Printer under Hardware and Sound , right-click your product name, and select Open . Right click the stalled print job, click Cancel , and click Yes . • Windows XP : Click Start and select Printers and Faxes . (Or open the Control Panel , selec...

2. Right-click your product name, select Printing Preferences , and select your product name again if necessary. 3. Click the Maintenance tab. 4. Click the Extended Settings button. 5. Select Enable EPSON Status Monitor 3 , then click OK . 6. Click the Monitoring Preferences button. 7. Click the Reg...

• If your product is connected to a USB hub, connect it directly to your computer instead. • If printing becomes slower after printing continuously for a long time, the product may have automatically slowed down to protect the print mechanism from overheating or becoming damaged.Let the product rest...

Parent topic: Solving Problems Inverted Image If your printed image is inverted unexpectedly, try these solutions: • Turn off any mirror or inversion settings in your printing application. • Turn off the Mirror Image , Flip horizontally , or Reverse page orientation settings in your printer software...

Related concepts Print Head Nozzle CheckPrint Head Cleaning Related tasks Selecting Basic Print Settings - WindowsSelecting Basic Print Settings - Mac OS XSelecting Printing Preferences - Mac OS X Incorrect Margins on Printout If your printed page has incorrect margins, try these solutions: • Make s...

• Windows Vista : Click and select Control Panel . Click Printer under Hardware and Sound , right-click your product name, and select Open . Right click the stalled print job, click Cancel , and click Yes . • Windows XP : Click Start and select Printers and Faxes . (Or open the Control Panel , selec...

• Select a higher print quality setting in your printer software. • Align the print head. • Make sure the product is not printing while tilted or at an angle. Parent topic: Solving Page Layout and Content Problems Related tasks Selecting Basic Print Settings - WindowsSelecting Basic Print Settings -...

Print Head CleaningPrint Head Alignment Related references Paper or Media Type Settings Related tasks Selecting Basic Print Settings - WindowsSelecting Additional Layout and Print Options - WindowsSelecting Basic Print Settings - Mac OS XSelecting Print Layout Options - Mac OS X Related topics Repla...

Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions. Parent topic: Solving Print Quality Problems Related concepts Print Head CleaningPrint Head Alignment Related references Available ...

Print Head Alignment Related references Paper or Media Type Settings Related tasks Selecting Basic Print Settings - WindowsSelecting Basic Print Settings - Mac OS XCleaning the Paper Guide Related topics Loading PaperReplacing the Ink Cartridge Grainy Printout If your printouts are grainy, try these...

Related topics Loading Paper When to Uninstall Your Product Software If you have a problem that requires you to uninstall and re-install your software, follow the instructions foryour operating system. Uninstalling Printing Software - WindowsUninstalling Product Software - Mac OS X Parent topic: Sol...

Uninstalling Product Software - Mac OS X In most cases, you do not need to uninstall your product software before re-installing it. However, youcan download the Uninstaller utility from the Epson support website to uninstall your product software asdescribed here. Note: If you find that re-installin...

• Proof of purchase (such as a store receipt) and date of purchase • Computer configuration • Description of the problem Then call: • U.S.: (562) 276-7202, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday • Canada: (905) 709-2567, 6 AM to 8 PM, Pacific Time...

Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. EPEAT RegistrationWindows System Require...

• Windows XP SP3 Note: Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for the latest in compatibility and drivers for your product. Parent topic: Technical Specifications Mac System Requirements To use your product and its software, your Mac should use...

Single-sheets Size A4 (8.3 × 11.7 inches [210 × 297 mm]) 4 × 6 inches (102 × 152 mm) 5 × 7 inches (127 × 178 mm) A6 (4.1 × 5.8 inches [105 × 148 mm]) 3.5 × 5 inches (89 × 127 mm) 5 × 8 inches (127 × 203 mm) 8 × 10 inches (203 × 254 mm) 16:9 wide (4 × 7.1 inches [102 × 181 mm]) 3.9 × 5.8 inches (100 ...

1 Left: 0.12 inch (3 mm) minimum 2 Bottom: 0.20 inch (5 mm) minimum 3 Top: 0.20 inch (5 mm) minimum 4 Right: 0.83 inch (21 mm) minimum Parent topic: Technical Specifications Ink Cartridge Specifications Note: We recommend that you use genuine Epson cartridges and do not refill them. The use of other...

Dimension Specifications Height Stored: 5.8 inches (148 mm) Printing: 11.7 inches (296 mm) Width Stored: 15.4 inches (392 mm) Printing: 15.4 inches (392 mm) Depth Stored: 10.4 inches (264 mm) Printing: 20.9 inches (530 mm) Weight 7.1 lb (3.2 kg) (without ink cartridge and powercord) Parent topic: Te...

Environmental Specifications Temperature Operating: 50 to 95 ºF (10 to 35 ºC) Storage: –4 to 104 ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Humidity Operating: 20 to 80% RH (non-condensing) Storage: 5 to 85% RH Parent topic: Technical Specifications Interface Specifications Interface type Hi-Speed ...

Communication mode Ethernet 100BASE-TX/10BASE-T * The connected device should be IEEE802.3az compliant. Parent topic: Technical Specifications Safety and Approvals Specifications United States Safety: UL60950-1 EMC: FCC part 15 Subpart B Class B Canada Safety: CAN/CSA-C22.2 No. 60950-1 EMC: CAN/CSA-...

Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. FCC Compliance StatementSoftware NoticesTrademarksCopyright N...

For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing EquipmentRegulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materielbrouilleur du Canada. Parent topic: Notices Software Notices 1. This pri...

kernel-2.6.18 lsp-arm-versatile926ejs-2.6.18_pro500 module-init-tools-3.2pre1 mount-2.12 net-tools-1.60 netbase-4.29 psmisc-21.5 readline-libs-5.0 sysvinit-2.86 udev-0.093 udhcp 0.9.8cvs20050124-5 util-linux-2.12 usb8786 GNU LGPL This printer product includes the open source software programs which ...

This printer product includes the open source software program "busybox- 1.2.2.1 " which applies theterms and conditions provided by owner of the copyright to the "busybox". linux-ftpd license This printer product includes the open source software program "linux-ftpd-0.17 " w...

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or thirdparties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alte...