Epson Stylus R360- User Manual

Epson Stylus R360

Epson Stylus R360– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
Page: / 7

Table of Contents:

  • Page 2 – CIS for Epson R380 Instruction; t be able to work properly if the nozzles are previously clogged.; Check whether all the accessories are ready.
  • Page 3 – Step 2: Take out the original cartridges; Step 3: Remove the carriage cover; Take off the cover of the carriage.
  • Page 4 – Place original cartridge above CIS; If the switch is turned to down palce, then CISS
  • Page 6 – Step 9: Check the nozzle; Press chip resetting button.
  • Page 7 – Refill Ink
Loading the manual

Continuous Ink Supply System

for

Epson Stylus Photo R360/R380/R390

Installation Instruction

For AT Prefilled Version

This Version of the Continuous Ink Flow System comes with Prefilled
Cartridges and Auto Reset Chips. You just need to fill the Reservoir
bottles and print! The whole operation is very easy. It

s really an

effective tool to save your money.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - CIS for Epson R380 Instruction; t be able to work properly if the nozzles are previously clogged.; Check whether all the accessories are ready.

CIS for Epson R380 Instruction Thank you for purchasing AT Continuous Ink Supply System. We appreciate your support and will try our best to make your experience with our products a pleasant one. Printing has been a different experience ever since you installed AT Continuous Ink Supply system on you...

Page 3 - Step 2: Take out the original cartridges; Step 3: Remove the carriage cover; Take off the cover of the carriage.

3. Installation Procedures: Step 1: Preparation Put the CISS on the left side of the printer. Pull out the small rubber plug from the Place 4pcs of air filters into air holes, and place all the tubes at correct position. air hole as picture shown above. Step 2: Take out the original cartridges Press...

Page 4 - Place original cartridge above CIS; If the switch is turned to down palce, then CISS

Step 4: Install Cartridges Step 5: Install the CIS Move the carriage to the left side. Put in the CIS cartridges as the picture shows. Move the carriage back to its original position. Install the cartridges according to color labels. Press the cartridges to make sure it is well installed. You will h...

Other Epson Models