Epson SFAC04 - Manual

When Complete is
displayed, press

.

Select the

highlighted

option

Select the

highlighted

option

Scroll up

Scroll down

Set your height,
weight, DOB,
gender, today's
date, and the date
format.

What’s in the box

Charge this product before using it for the first time.

1.

Connect the cradle to a power source.

»

Using a PC

Connect the cradle’s USB plug to the computer’s USB port.

Do not use a USB hub. Instead, connect the cradle directly to the computer.

»

Using the optional AC adapter

Connect the cradle’s USB plug to the AC adapter’s USB port.

We recommend using the optional AC adapter (model number: SFAC04). If you do not use a

supported AC adapter, you may not be able to charge the product or it may not operate

correctly.

2.

Place the product into the cradle.

Check that the contact points on the product are pointing up and match the contact marks

on the cradle. After placing the product into the bottom of the cradle with the LCD screen

facing out, push carefully on the top of the product until it clicks into place.

Contact marks

When the product is placed correctly, the alarm sounds, the charging screen is displayed, and

charging starts.

3.

When charging is complete, remove the product from the cradle.

Hold the cradle and press the product down into the lower part of the cradle to release the

product.

4.

Follow the on-screen instructions to set the language, units, and user information.

5.

When you are in a location with no obstructions overhead, select

Yes

.

A signal is received from the GPS and time is automatically synchronised.

When you do not use the product for a while, it enters sleep mode and the time display turns off. This is
not a malfunction as the display is restored the next time you move the product. If time synchronisation
fails, the time screen will automatically be updated the next time a GPS signal has been received. You can
proceed to section 2, “Using RUNSENSE View.”

Quick Start Guide

Your Runsense product is made from materials commonly used in watches and other consumer
products. Since you may wear your product over extended periods, including when you are exercising
and sweating, it is important that you take care of your skin and your product according to these
instructions. Prolonged wearing of your product without proper care could lead to skin irritation or rash.
Please follow the precautions below to ensure full enjoyment and benefit of your Runsense product:
• Keep Runsense and skin clean.
• Keep Runsense and skin dry.
• Give skin a rest and some air.
Proper wear and care of your SF-810 is an important part of your enjoyment of this product. Make sure
to see the online

User Manual

for more detailed information on caring for your product.

Safety Instructions

The following symbols are used in this guide to indicate possible dangerous operations or handling.
Make sure you understand these warnings before using the product.

Warning

This symbol indicates information that, if ignored, could possibly result in
serious personal injury.

Caution

This symbol indicates information that, if ignored, could possibly result in
personal injury or damage the product.

This symbol indicates an action that should be done.

This symbol indicates an action that must not be done.

Notes on Using the Product and Components

Warning

Exercise according to your physical capabilities.

Stop exercising and consult your doctor if you feel unwell during exercise.

This product is not intended for use to diagnose, prevent, or treat disease or other conditions, and

is not a medical device. If you have any concerns, consult your doctor before using this product.

Do not use or store this product in the following environments. It may cause an electric shock or

fire, or the product may malfunction or be damaged.

•Locations with very high or low temperatures or humidity

•Near volatile substances

•Dusty places

•Near a strong magnetic field (for example, near a loudspeaker)

Do not disassemble this product, and do not attempt to repair this product by yourself. It may

cause an electric shock or accident.

Do not leave this product within reach of young children.

The cradle cords included with this product contain chemicals, including lead, known to the State

of California to cause birth defects or other reproductive harm. Wash hands after handling. (This

notice is provided in accordance with Proposition 65 in Cal. Health & Safety code § 25249.5 and

following.)

Caution

Persons with high skin sensitivity, eczema, allergies, or asthma may be more likely to experience

skin irritation or an allergic reaction from the Runsense product or similar products. Even persons

without such conditions may start to experience redness or skin irritation on wrists from prolonged

use or if the product is not cleaned regularly as indicated above. If you experience such symptoms:

• Stop wearing and remove your product immediately. Do not put it back on.

• If symptoms persist for more than 2-3 days after removing the product, consult a dermatologist.

• Make sure to follow the wear and care instructions above and in the online

User Manual

.

Caring for your SF-810

This product has a Time screen, Measurement screen, Settings
screen (Settings menu and Measure set. menu), and History screen,
and you can perform operations with the following buttons.

Button

Operation

Time screen

Measurement screen

Settings screen

Short press

Starts heart rate
measurement.

Changing between screen.

Confirm a selection.

Long press*

1

Turns the power on or off.

Displays the time screen.
(Not available while
measuring.)

From the Settings menu,
the time screen is displayed.
From the Measure set.
menu, the measurement
screen is displayed.

Short press

Turns the light on or off. The light turns on for approximately 10 seconds.

Long press*

1

Displays the Settings menu.
> Settings screen

Displays the Measure set.
menu.
(Not available while
measuring.)

–

Short press

Performs GPS positioning,
and displays the
Measurement screen.

Starts, stops, or resumes
measuring.

Selects the upper item.
Increases the value.

Long press*

1

–

Displays the time screen.
(Not available while
measuring.)

Selects the upper item.
Scrolls through the values.

Short press

Displays your workout
history.

Records laps while
measuring.

Selects the lower item.
Decreases the value.

Long press*

1

Sync to Bluetooth device.
Use this when uploading
measurement data.

Resets*

2

while measuring is

stopped.

Selects the lower item.
Scrolls through the values.

*1 Hold down for at least two seconds until the screen changes.
*2 When you reset the display, it returns to the status before measuring started allowing you

to start the next measurement. Data that has been measured up to that point is stored in the

product's memory.
If no operations are performed after three minutes when the System settings, User settings, or

History screens are displayed, you are returned to the time screen.

Using your SF-810

GPS Sports Monitor

1. Charging and setup

This function allows you to measure split times and lap times simultaneously.

You can record laps by pressing on the product during Chronograph measurement, or by using the
AT lap function.

Using the

chronograph

TM

Installing Epson Run Connect Software

This product allows you to manage measured data using the RUNSENSE View web app. To upload
measurement data, you need to install Epson Run Connect on your Windows PC and connect to the
Internet.

Install Epson Run Connect before connecting the product to your PC.

1.

Visit

epson.com/support/sf810

(U.S.) or

epson.ca/support/sf810

(Canada)

and

download Epson Run Connect for PC.

2.

Run the downloaded file and follow the instructions displayed on the setup

screen.

2. Using Epson RUNSENSE View (Windows® PC)

An optional AC adapter can be purchased separately.

Watch

Cradle

Creating an account

1.

Connect the cradle with a USB cable to the PC on which Epson Run Connect is

installed.

2.

Place the product into the cradle.

Check that the contact points on the product are pointing up and match the contact marks on

the cradle.

Contact marks

Epson Run Connect starts.

3.

Click

Create Account

and enter your details.

Uploading your data

Connect your RUNSENSE product to the computer. The following box automatically

appears. Enter your

Login ID

and

Password

and click

Upload

.

Viewing your data

1.

Click

Start RUNSENSE View

on the Run Connect screen.

Or visit

https://go-wellness.epson.com/runsense-view/

.

2.

Click the data you want to check from the list.

For information on using the RUNSENSE View, see the RUNSENSE View Help.

NOTE

NOTE

NOTE

Installing Epson Run Connect

Download and install Epson Run Connect from your mobile device's app store.

The following mobile devices are supported:
• iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6, and iPhone 6 Plus with iOS 6 or later.
• Mobile devices running Android

TM

4.3 or later with Bluetooth® Smart.

Pairing your product

1.

Start the Epson Run Connect app.

2.

Tap

Pairing

.

3.

Tap

Start Pairing

.

4.

Press and hold on the product.

5.

Tap

OK

on your mobile device.

 

Your product displays a passcode.

6.

Enter the 6-digit passcode on your mobile device and tap

OK

or

Pair

.

7.

Tap

OK

to finish pairing.

For more information on using the Epson Run Connect app, see the online iOS or Android user manual.

3. Using the Epson Run Connect app

NOTE

NOTE

Wear the product snugly around your wrist as shown in the illustration below.
Tighten the wristband if your pulse is not measured correctly while exercising.

After putting on the product, press

on the Time screen, and check that your pulse is being measured.

4. Wearing your SF-810

NOTE

Heart rate sensor

Bone

Start

Split Time

Measures the elapsed time from the start.

Lap Time

Records the elapsed time for each lap.