Page 2 - COPYRIGHT
COPYRIGHT Copyright © 2006/2007 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, c...
Page 4 - Contents
Contents 1. Introduction ...................................................................... 1 2. Product Package ............................................................. 2 3. Combo Print Server ......................................................... 3 4. Getting Started .....................
Page 7 - Combo Print Server
3 3. Combo Print Server This Combo Print Server supports GDI Print Server. Users can share GDI printer through the Combo Print Server. GDI printer is a printer that has built-in support for Windows Graphical Device Interface (GDI), so it is no need to convert the output from Windows to another forma...
Page 8 - Hardware Installation Procedure
4 4. Getting Started Before you start, you should have: One computer with Windows 2000 SP4 above or Windows XP SP1 above One GDI printer or printer with USB port and an installation CD One Category 5 Ethernet Cable One USB Cable 4.1 Hardware Installation Procedure 1. Unpack the Print Server ...
Page 9 - Software Installation Procedure
5 4.2 Software Installation Procedure Before you start, you should check your computer’s operating system. This program can be run in Windows 2000 SP4 above or Windows XP SP1 above. Please follow the steps below to start installation. Tip: You have to uninstall all the Print Server drivers and utili...
Page 18 - Printer
14 4.2.1 GDI/Host-based Printer Following is the installation procedures for “GDI/Host-based Printer” installation. (Printer install example: Cannon MP130) 1. The program will start installing the Print Server Drivers automatically. You will see several pop-up screens and some prompt messages in the...
Page 24 - Using GDI Printer
20 Using GDI Printer After restarting the computer, you will find there are two printer icons added to “Printers and Faxes” in the Windows. The “Printer Model Name(Network)” will stand for the printer. If you want to print a file or document, please print to “Printer Model Name(Network)”. To set the...
Page 26 - Print Server Utilities; Setup Wizard
22 4.3 Print Server Utilities After the installation is completed, there will be four utilities add to “Start/Programs/Print Server Utilities” folder in the Windows. Setup Wizard – If you don’t install the printer during the software installation in Section 3.2, you can run this setup wizard to inst...
Page 28 - Server Configuration; Search Print Server:; General Configuration:; System Configuration:
24 6. Server Configuration 6.1 Introduction This chapter introduces Combo Print Server’s system configuration utility in Windows environment. This utility provides the most complete management and configuration functions on the Combo Print Server side. This utility only provides configuration functi...
Page 29 - Search for All Available Combo Print Server
25 6.2 Search for All Available Combo Print Server Every time when you run the “Server Manager” configuration utility, click the “Search” icon on the tool bar. The configuration utility will delay for several seconds because the utility is using system’s available network protocols to search for all...
Page 30 - Status of Combo Print Server
26 6.3 Status of Combo Print Server Click “Status” icon on the tool bar, the status of the currently selected Combo Print Server will be showed on the right side of the window. The information of the Combo Print Server displayed are including MAC ID, Model Type, Firmware Version, status of each serv...
Page 31 - Setup the Combo Print Server
27 6.4 Setup the Combo Print Server Click “Setup” icon on the tool bar, the setup items of the current selected Combo Print Server will be showed on the right side of the window. Double click one of the icons to set up the selected Combo Print Server. A screen will pop up to verify “User Name” and “...
Page 32 - Configuration; Server Name
28 6.5 General Configuration Double Click “General” icon and the General configuration window will pop-up. You can see basic Combo Print Server information in this page. You also can configure the “Server Name”, “User Name” and “Password” here. Server Name , the name of the Combo Print Server. You c...
Page 35 - System Configuration; Upgrade Firmware; Load Default
31 6.7 System Configuration Double Click “System” icon and the System configuration window will pop-up. In the System configuration page, you can see all available printing protocols and upgrade the new firmware for this Combo Print Server. Upgrade Firmware : You can use this “Upgrade Firmware” tool...
Page 38 - Setup
34 7.3 Device Setup 7.3.1 System This web page will display the information about the Combo Print Server. Device Name: The device name is not configurable. By default, it is the last 6-digit of the MAC ID of the print server with prefix “PS”. Print Server Name: The print server name is the same as d...
Page 39 - Wireless LAN Status:
35 Wireless LAN Status: It will show if the Combo Print Server supports WLAN function. Firmware Version: Display the firmware version of the Combo Print Server. MAC Address: The MAC ID of the Combo Print Server will be displayed here. RAW/IPP/LPR Printing: By default, the RAW/IPP/LPR printing protoc...
Page 42 - Wizard; Combo Print Server Name,
38 7.4 Setup Wizard Note: After you have changed the settings from the Setup Wizard, please click “Save Settings” in the menu of the left side to let the settings take effect and reboot the Combo Print Server. 7.4.1 System You can change the server name and password of the Combo Print Server from he...
Page 43 - Settings
39 7.4.1.1 Advanced Settings Some advanced feature of the Combo Print Server can be set here. TCP/IP Printing (LPR/IPP/RAW): This Combo Print Server supports TCP/IP network protocol and LPR/IPP/RAW printing protocols. By default these protocols are enabled.
Page 46 - Tools; Default
42 7.5 System Tools 7.5.1 Load Default You can use this page to restore the factory default settings. Click “OK” and after the print server is restarted, the process is completed. Be aware that all of your previous setup will be cleared.
Page 51 - Type
47 Appendix: Combo Print Server Compatibility List The compatibility information is the first released in May 2007. For the latest information, please contact with your dealer. GDI Printers No. Company Type Printer Model Print 1. HP B&W LaserJet Printer LaserJet 1020 OK 2. HP B&W LaserJet Pr...