Epson PowerLite 83 Plus- User Manual
Epson PowerLite 83 Plus– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
INSTALLATION HANDBOOK
Lamp and Status Information
Epson PowerLite 83+
Projector Status Lights
The lights on top of the projector indicate the projector’s status
and let you know when a problem occurs.
If the projector is not working correctly, first turn it off and
unplug it. Then plug the power cord back in and turn on the
projector. If this does not solve the problem, check the status
lights on top of the projector and try the solutions
recommended in the following table.
Lamp light
Power light
Temperature
light
.
Power
light
Lamp
light
Temp.
light
Description
Green
Off
Off
The projector is operating
normally.
Flashing
green
Off
Off
The projector is warming up.
Wait for the image to appear.
Orange
Off
Off
The projector is in standby or
sleep mode. You can unplug it or
press the
P
Power
button to
turn it on.
Flashing
orange
Off
Off
The projector is shutting down.
Wait for the light to stop flashing
and remain orange before
unplugging it.
Red
Off
Flashing
orange
The projector is too hot. Make
sure the temperature
surrounding the projector does
not exceed 95
°
F (35
°
C) and
there is plenty of space around
and under the projector for
ventilation. Clean the air filter and
air vents, if necessary.
Red
Off
Red
The projector has overheated and
turned itself off. Let it cool for
about five minutes, then turn it
back on. Make sure there is
plenty of space around and under
the projector for ventilation. If
you are using the projector at an
altitude above 4921 ft (1500 m),
turn on High Altitude Mode as
the Operation setting in the
Extended menu. Also clean the
air filter and air vents. If it
continues to overheat, you may
need to replace the air filter.
Red
Flashing
red
Off
The lamp is burned out, broken,
or not installed correctly; or the
lamp cover is open. Close the
cover or replace or reseat the
lamp, if necessary. Also clean the
air filter and air vents. If these
suggestions don’t work, contact
Epson.
Orange
Flashing
orange
Off
Replace the lamp with a new one
as soon as possible. If you
continue to use the lamp, there is
a risk it may break.
Red
Off
Flashing
red
There is a problem with the fan
or a sensor. Turn the projector off
and unplug it. Contact Epson for
help.
Red
Red
Red
There is an internal error in the
projector. Turn the projector off
and unplug it. Contact Epson for
help.
Power
light
Lamp
light
Temp.
light
Description
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
