Epson PowerLite 825- User Manual
Epson PowerLite 825– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
INSTALLATION HANDBOOK
Maintenance
Epson PowerLite 85/825/826W
Cleaning the Air Filter and Vent
Your projector includes an air ter to ensure the best performance. If
dust collects on th
or vent, clean them as described below.
Dust clogs prevent proper ventilation and can cause overheating and
damage the projector.
If you see the following message, clean the air ter immediately.
The projector is overheating. Make sure nothing is blocking the
air vent, and clean or replace the air filter.
1. Turn the projector. Wait for the
P
power light to stop
then unplug the power cord.
2. To clean the intake vent and
use a small vacuum cleaner
designed for computers and other
e equipment. If you don’t
have one, gently clean the vent with a soft brush (such as an
artist’s paintbrush).
You can remove the air lter to clean both sides. For instructions,
see page 110.
3. If the dirt is di
ult to remove or the
is damaged, or if the
message appears again after cleaning, replace the lter as described
on page 110. Contact
your
dealer
o r call
Epson
at
800-GO-EPSON (800-463-7766) to purchase
note
To order replacement air
lters, request part number
V13H134A22. See page 13
for ordering information.
The exhaust
vent is on the
other side of
the projector
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
