Epson on letter 3- User Manual

Installing a • Install the software as a user with administrator authority. • Close all running applications and then start the installation. Windows a Turn on your computer. b Insert the EPSON Projector Software for Easy Interactive FunctionCD-ROM into your computer. The installer starts automatica...

OS X a Double-click Applications - Easy Interactive Tools Ver.X.XX . b Run Easy Interactive Tools Uninstaller from the Tools folder. c Follow the on-screen instructions to uninstall. Install Easy Interactive Tools 6

Starting Easy Interactive Tools Make the following preparations before starting Easy Interactive Tools. a The projector's setting method and items varies depending on themodel being used. Also, models that do not support networkconnection cannot be connected to over a network. For more details,see t...

Operating the Interactive Pen You can use the interactive pen supplied with the projector to operate theEasy Interactive Tools. The functions and shape of the interactive pen differ depending on themodel with which it was supplied. For more details, see the projector'sUser's Guide. Check that there ...

When performing touch operations, you can also use two fingers for multi-touch operations such as enlarging or reducing the image. The projectorrecognizes up to six multi-touch points. When a group of people areperforming touch operations, all members must use the same drawingtool. Drawing Select a ...

a To draw on images from a document camera, select Camera on the Home screen, or [ ] from the Command Bar. The image from the document camera is displayed on the Camerascreen. s "Camera Screen" p.17 b Select [ ] on the Drawing Toolbar. c Draw on the projected image. a To change the color and...

Drawing in Whiteboard mode This section explains how to draw on a plain page in Whiteboard mode. In Whiteboard mode, you can add pages from the Command Bar, as well asdisplay the page list screen where you can perform page operations. a Select New on the Home screen or [ ] from the Command Bar. Whit...

JPG/BMP/PNG Saves all pages by treating one page as onefile. PDF/EIT Saves all pages in one file. You can set the save location, file name, and the file format on the Save Settings tab on the Settings screen. s "Save Settings tab" p.20 Changing between full display and window display When yo...

You can perform the following functions on the Home screen. A Desktop annotation Annotation mode starts and the computer's screen is displayed. B New Whiteboard mode starts and a new file is displayed. C Open Whiteboard mode starts and you can open a file saved previously. You canselect EIT files, o...

You can perform the following functions from the Command Bar. Annotation mode Whiteboard mode A Home Screen Displays the Home screen. B Save Saves the displayed screen in JPEG, BMP, PNG, PDF, or EIT format.All pages are saved in Whiteboard mode. If you save in PDF or EITformat, all pages are saved a...

L Page list Displays the page list screen.When the interactive pen leaves the page list, the list is automaticallyminimized to the right or left of the screen. The page list is displayedagain when the interactive pen moves to the minimized area. If you select [ ], it changes to [ ], and the page lis...

Emphasizes part of the projected image using a spotlight effect. Youcan drag the spotlight frame to change the emphasized area. Click [ ] to exit spotlight. You can change the shape of the spotlight from the General Settings tab on the Settings screen. The following functions are only available in W...

• [ ]: Adjusts the brightness of the image. Move the slider to the right to increase the brightness, and to the left to decreasethe brightness. • [ ]: Adjusts the contrast of the image. Move the slider to the right to increase the contrast, and to the left to decrease the con‐trast. • Reset : Restor...

Save Settings tab Check when saving Select to display the screen where you can set the savelocation, file name, and file format when saving images. Save location folder Sets the folder where you want to save the screen.The following are the default folders for saving screens. Windows XP <startup_...

Save location folder Sets the folder where you want to save the movie.The following are the default folders for saving movies. Windows XP <startup_drive>:\Documents and Settings\<user_name>\My Documents\Easy Interactive Tools Windows Vista/Windows 7/Windows 8 <startup_drive>:\users...

You can select the following functions from the Drawing Toolbar. Annotation mode Whiteboard mode A Mouse (This is only available during Annotation mode.)Switches from drawing operations to mouse operations, and the cursoron the computer screen becomes a normal mouse cursor. You can clickand drag on ...

M Close (This is unavailable on a window displayed in Whiteboard mode.)Closes the Drawing Toolbar. The Command Bar is also closed duringAnnotation mode.You can display the Drawing Toolbar again by selecting the Drawing Toolbar tab [ ] on the right or left side of the screen. N Add Text Changes to te...

Bring to FrontSend to BackBring ForwardSend Backward Changes the overlapping order for the selected object. Youcan select multiple objects. Delete Deletes the selected object. You can select multipleobjects. a Shortcut operations, such as pressing the [ctrl] + [A] key on thecomputer's keyboard, are ...

P r oblem S olution Characters become garbled after changing the language. Characters become garbled if fonts for the language you are using are not available on your operating system.Select Restore defaults on the Settings screen to restore the default settings. s "Settings Screen" p.18 The...

All rights reserved. No part of this publication may be reproduced, stored in a retrievalsystem, or transmitted in any form or by any means, electronic, mechanical,photocopying, recording, or otherwise, without the prior written permission of SeikoEpson Corporation. No patent liability is assumed wi...