Epson NX305 - Manual

Epson NX305

Epson NX305 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4
Loading the manual

Start Here

5

Load paper

1

Open the paper support and pull up the extensions.

2

Open the output tray, pull out the extension, and raise the
paper stopper.

3

Pinch the edge guide and slide it to the left.

4

Load paper against the right edge guide and behind the
tab, with the printable side face up.

4 x 6

8½ x 11

Note:

Don’t load the paper sideways; always

load it short edge first.

5

Slide the edge guide over.

Read these instructions before using your product.

1

Unpack

USB cable

Power cord

Caution:

Do not open the ink cartridge package until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials.

2

Turn on

1

Connect the power cable.

Caution:

Do not connect to your computer yet.

2

Press the

On

button.

3

Make settings

Stop/

Clear Settings

B

&

W

Color

/Fax

1

Press

or

to select your language, then press

OK

.

2

Press

or

to select your country or region, then press

OK

.

3

Press

or

to select

Summer

if your region uses Daylight

Saving Time and it’s currently in effect. (DST is effective from
spring through summer.) Otherwise select

Winter

to turn off

the setting.

4

Press

OK

.

5

Press

or

to select the date format, then press

OK

.

6

Use the numeric keypad to change the date, then press

OK

.

7

Press

or

to select a 12-hour or 24-hour time format,

then press

OK

.

8

Use the numeric keypad to set the time.

If you chose a 12-hour time format, press

or

to select

AM

or

PM

.

9

Press

OK

.

4

Install ink cartridges

1

Lift up the scanner.

2

Open the cartridge cover.

3

Shake the ink cartridges, then unpack them.

4

Remove only the yellow tape from each cartridge.

Caution:

Don’t remove any other seals from the cartridges.

5

Insert the cartridges in the holder for each color.

6

Press each cartridge down until it clicks.

7

Close the ink cartridge cover and press it down until
it clicks.

8

Lower the scanner.

9

Press the

OK

button to charge the ink. Charging takes

about 2 minutes.

Note:

Your printer ships with full cartridges and part of the ink

from the first cartridges is used for priming the printer.

Caution:

Don’t turn off the printer while it is charging or you’ll

waste ink.

Epson Stylus

®

NX300/305 Series

*411852500*

*411852500*

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Epson Models