Epson NX210 Series - Manual
Epson NX210 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
*411651500*
*411651500*
If anything is missing, contact Epson as described on the back.
Note:
The model name of your product may vary slightly from the one shown above.
The included CD and documentation apply to all products in the series.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Canada only:
For French speakers, remove stickers from the backing sheet and place
over corresponding text on the control panel.
Remove all protective materials.
Unpack
1
Start Here
Select your language
3
You can change the language that appears on your LCD display screen from
English to French, Spanish, or Portuguese.
Press
or
to select to select your language, then press
Start
.
1/4
3
Flip the feeder guard forward. Then squeeze the edge guide and
slide it left.
4
Load paper against the right edge and behind the tab, with the
printable side face up.
8½ 11
4 6
Note:
Don’t load the paper sideways; always load it short edge first.
5
Slide the edge guide over.
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On
button.
Turn on the printer
2
(Included for Canada only)
Install ink cartridges
4
Note:
Do not load paper yet.
1
Lift up the scanner, then open the cartridge cover.
2
Shake the ink cartridges gently 4 or 5 times, then unpack them.
3
Remove only the yellow tape from each cartridge.
Caution:
Do not remove any other seals or the cartridge may leak.
4
Insert the cartridges in the holder for each color.
5
Press each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks.
7
Lower the scanner.
8
Press the
Start
button to charge the ink. Charging takes about
2 minutes.
Note:
Your printer ships with full cartridges and part of the ink from the
first cartridges is used for priming the printer.
Caution:
Don’t turn off the printer while it is charging or you’ll waste ink.
1
Open the paper support and pull up the extensions.
2
Open the output tray, pull out the extensions, and raise the stopper.
Note:
Do not raise the stopper for legal-size paper.
5
Load paper
Series
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
