Page 2 - ENGLISH; RISK OF ELECTRIC SHOCK; CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK,; WARNING
2 ENGLISH RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intendedto ...
Page 3 - Contents; Trademark, Registered trademark; SpacePointer
3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview of the projector ...................................................................... 6 Overview of the remote control .......................................................
Page 4 - Important safeguards
4 ENGLISH Important safeguards PLEASE READ ALL THESE INSTRUCTIONS RE-GARDING YOUR LCD PROJECTOR AND RETAINTHEM FOR FUTURE REFERENCE. FOLLOW ALLWARNINGS AND INSTRUCTIONS MARKED ONTHE LCD PROJECTOR. 1. Read instructionsAll the safety and operating instructions shouldbe read before the appliance is ope...
Page 6 - Overview of the projector
6 ENGLISH Overview of the projector Normal On Menu On PC card Menu FINE ( ) Adjust FINE (-) Select the setting item (Left) Select previous image (Left) FINE ( ) Adjust FINE(+) Select the setting item (Right) Select next image (Right) FOCUS / ZOOM FOCUS or ZOOM setting Enter the layer setting Select ...
Page 7 - U s e t o i n p u t v i d e o s i g n a l s ( a n a l o g; SPEC; PC card insert slot; Press to eject the PC card. See page 27.; line output
7 ENGLISH PC analog RGB input U s e t o i n p u t v i d e o s i g n a l s ( a n a l o g RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO. SPEC 1 R(RED)/C R 9 — 2 G(GREEN)/Y 10 GROUND 3 B(BLUE)/C B 11 GROUND 4 GROUND 12 — 5 GROUND 13 HD/CS 6 GROUND 14 VD 7 GROU...
Page 8 - Overview of the remote control; power; Use to expand the image.
8 ENGLISH Overview of the remote control The operations of these buttons varies as follows depending on the modes selected: Normal On Menu On PC card Menu PinP EXPAND $ $ $ $ $ Adjust FINE (-) Select the setting item (Left) Select previous image (Left) Exchange the image (main or sub) Expand differe...
Page 9 - Battery installation
9 ENGLISH Important: • To save battery power, turn off the operation indicator by pressing the START/STOP button when not in use.• To save battery power, the operation indicator will turn off if the remote control is not operated for a period of 5 minutes. Battery installation Use two AA size batter...
Page 10 - Preparing the projector for operation; Orientation of the projector; Front projection; • Refer to the chart to recom-; Screen; Front projection, ceiling mount; screen
10 ENGLISH Preparing the projector for operation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distancebetween the projector and screen:Multiply the width of the screenx 1.875 ~ 1.975 (max....
Page 11 - Adjusting the angle of projection
11 ENGLISH Adjusting the angle of projection Screen on a flat wall with a 90 degree angle to the floorby adjusting two foot adjustments on the bottom of theprojector. If the angle cannot be corrected by them,adjust the height and angle of screen. 1. Lift the projector to the right angle. 2. Press th...
Page 12 - Cables and adapters; RGB cables; Basic connections; to one another affects the image.; Projector + AV equipment; Make sure that your equipment is turned off before connection.; Projector + DVD player; Note: Set the dip switch to the appropriate position.; RGB Conversion adapter for NEC PC (Option)
12 ENGLISH Cables and adapters To connect personal computers to this projector, the following cables and adapters are necessary. The overviewmight be different from the picture below. RGB cables (mini D-SUB 15P plug) . Note: The pins numbered 5, 9, 12 and 15 are not connected. RGB Conversion adapter...
Page 13 - Projector + IBM PC or IBM PC compatibles; When outputting to both a PC monitor and the projector; desktop computer
13 ENGLISH Projector + IBM PC or IBM PC compatibles Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The audio input for ...
Page 14 - Projector + Macintosh
14 ENGLISH Projector + Macintosh Make sure that your equipment is turned off before connection. Important: • A monitor output adapter is necessary for a Macintosh if it has no video port. Contact your dealer.• If you use the RGB conversion adapter provided, set the dip switch to the appropriate posi...
Page 15 - notebook computer
15 ENGLISH Projector + NEC PC-98 series Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The audio input for a personal c...
Page 16 - To operate projector power ON; Left side
16 ENGLISH To operate projector power ON Numbers 1 - 9 correspond to the instruction numbers below. Important: • A darkened image may be seen right after pressing the POWER button due to warming up of this pro-jector. When warming up, no other commands canbe accepted. • When the lamp indicator is bl...
Page 17 - Turning off the projector
17 ENGLISH AUTO POSITION button When the source is selected to RGB1 or RGB2 andthe image is not in the right place, set to display asblightest signal as possible, then press the AUTOPOSITION button. If the image is still not in theright place.• Set screen to the brightest display possible (e.g., ful...
Page 18 - Basic operation; Menu operation
18 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Brightness adjustment 1. Press the MENU button. 2. Press the or buttons on the control panel (or $ or % buttons on the remote control) to select PICTURE. 3. Press the ª or º buttons on the control panel (or { or } butto...
Page 19 - corrects the contrast of projected images.
19 ENGLISH Q SIGNAL AUTO .................. Use to select AUTO, USER 1 or USER 2.HORIZ. POSITION .... Use to adjust the horizontal position of the image.VERT. POSITION ..... Use to adjust the vertical position of the image.FINE SYNC. ....... Use to synchronize the projector with PC input signals so ...
Page 20 - frame which shows the PinP part.; PC CARD AUTO PLAY; is effective when the projector is ceiling-mounted.
20 ENGLISH E PinP/EXPAND This menu appears when either the display enlargement or PinP functions are used. ZOOM MODE ..... Selects the desired type of expand mode, type1, 2, 3 or 4 (Actual size display).POSITION .......... Selects the desired position of the sub image in expand or PinP mode.SIZE ......
Page 21 - input signal selected source. Select OFF to cancel this function.
21 ENGLISH U OPTION MOTION/STILL . Select MOTION when motion images are mainly projected. Select STILL when still images such as PC-CARD images are mainly projected. It works only when inputting personalcomputers of SXGA signals or inputting video signal. SQUEEZE ........... Set to switch the normal...
Page 22 - Adjustment from personal computer; Picture adjustment
22 ENGLISH Adjustment from personal computer Although this projector sets proper signal systemsautomatically for the image signal from personalcomputers, it cannot be applied to some of personalcomputers. In this case, press AUTO POSITIONbutton. If the images are still not projected correctly,use ME...
Page 24 - GAMMA CORRECTION menu
24 ENGLISH GAMMA CORRECTION menu The proportion of the brightness of input signals to that of output signals can be corrected effectively by adjustingGAMMA. 1. Select GAMMA CORRECTION of PICTURE menu and then press the ENTER button. (The GAMMACORRECTION menu appears on-screen display.) Horizontal ax...
Page 25 - Advanced feature for presentation; Cursor operation; To draw line or frame; Still; SLOW
25 ENGLISH Advanced feature for presentation Cursor operation 1. Press the CURSOR button. The cursor appears on the screen. 2. Press the START/STOP button to ON. The operation indicator will be illuminated.(The operation indicator will turn off if the remotecontrol is not used for a period of five m...
Page 26 - Advanced feature for presentation (Continue); Expand; Setting the Expand mode; Using the Expand mode
26 ENGLISH Advanced feature for presentation (Continue) Expand By pressing the EXPAND button on the remote con-trol, you can view the detailed image of the picture. Setting the Expand mode 1. Press the MENU button once to display the on- screen menu. 2. Press the or buttons on the control panel (or ...
Page 29 - Advanced feature with PC; Environment; EXPORT LAW ASSURANCES; Installation of software
29 ENGLISH Advanced feature with PC There are three types of application software provided.1. PCV (PC Card Viewer)2. PCGC (Personal Computer Graphic Controller)3. SpacePointer (Driver for PC control by the remote controller) Environment The following system software and hardware are nec-essary to us...
Page 34 - When you wish to record the image from existing files.; Delete the image; Drag the image and drop on the next or previous; Preview an image; The preview image appears on the displays.
34 ENGLISH When you wish to record the image from existing files. 1. Choose [Create New presentation...] under the [File] menu.The new presentation window will open. 2. Choose [Open image file] under the [File] menu. 3. Select the image you wish to record. 4. Click OK button. The recorded image appe...
Page 35 - Connection; Projector + NEC PC 98 and EPSON series
35 ENGLISH B. PCGC (Personal Computer Graphic Control) By connecting to personal computer is RS-232C port, you can operate your computer with the projector remotecontrol. Also you can set the menu setting of the projector by computer. Connection Projector + IBM PC or IBM PC compatibles (DOS/V) Note:...
Page 37 - Projector + NEC PC 98 series
37 ENGLISH C. SpacePointer The remote control provides remote PC operation for presentation from PC. Connection Projector + IBM PC or IBM PC compatibles (DOS/V) RS-232C cable RS-232Ccable(option) to Com1Comport to RS-232C1 terminal to RS-232C2 terminal When connecting two personal computers to Com1C...
Page 38 - For Windows; For Macintosh; A L P S
38 ENGLISH Installation of software For Windows 951. Start up Windows. 2. Insert the Projector driver CD-ROM into your CD- ROM drive. 3. Start up Program Manager. Click the [Start] button and select the [Run (R)] com-mand. Then the [Run] dialog box is displayed. 4. If you inserted the CD-ROM to driv...
Page 39 - Uninstallation of software; When the installation program starts up, follow the
39 ENGLISH Uninstallation of software For Windows 951. Start up Windows. 2. Insert the Projector driver CD-ROM into your CD- ROM drive. 3. Start up Program Manager. Click the [Start] button and select the [Run (R)] com-mand. Then the [Run] dialog box is displayed. 4. If you inserted the CD-ROM to dr...
Page 40 - Replacement of a light source lamp
40 ENGLISH The light source lamp is designed to project the imageon the LCD panel. When the light source lamp no longerfunctions, replace it with a new one to ensure optimumperformance. Caution: • Do not remove the light source lamp from inside of this equipment immediately after using the projec-to...
Page 41 - The life of the lamp
41 ENGLISH Caution: • The light source lamp is fragile. Be careful not to cut yourself with the fragments. • The lamp life depends on the environment. For re- placement lamps, please contact your dealer. The projector automatically shuts off whenthe lamp is used up in about 1,300 hoursand not used u...
Page 42 - Maintenance; Cleaning the air-filter
42 ENGLISH Maintenance Caution: Be sure to turn off the projector and unplug the powercord from the wall outlet before you perform any main-tenance on the projector. Cleaning the air-filter Clean the air-filter frequently. If the filter or ventila-tion slots become clogged with dirt or dust, the tem...
Page 43 - Troubleshooting; CAUSE; Power indicator does not light up.; • Screen size exceeds screen size specifications.; POSSIBLE SOLUTIONS
43 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consultthis chart before contacting your dealer. CAUSE • The air intake vents, exhaust vents or air filter is clogged with dust or some object. Power indicator does not lig...
Page 44 - Indicators
44 ENGLISH Indicators The projector has three indicators each of which shows the working condition of the projector. The following offers solutions to possible problems. If a problem persists, turn the projector off and consult yourdealer. LAMP RGB VIDEO TEMP INDICATOR TEMP INDICATOR SHOWS blinking ...
Page 45 - Specifications; Replacement parts list; What’s included in the box; Accessories
45 ENGLISH Specifications LCD projector LVP-X200A AC100 ~ 240V, 50 / 60Hz 5.0A 1.3-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels Total 2,359,296 pixels Active pixel rate: 99.99 % or more (each panel) F 2.3~2.7 f = 53.3 ~ 69.3 mm 330 W DC metal halide lamp aspect ratio 4:...
